1 June 2013 in Journal of Catalysis
17 October 2023 in IEEE Journal of Solid-State Circuits
To enhance sampling rates of CMOS digital-to-analog converters (DACs), analog multiplexing of several DAC output signals in the time domain provides a solution. In this article, a full CMOS integration of two sub-DACs and an active analog multiplexer (AMUX) on a single chip in 28-nm fully depleted silicon-on-insulator (FD-SOI) CMOS technology is presented for the first time for sampling rates of 100 GS/s and beyond. Sampling rates up to 108 GS/s for broadband pulse-amplitude modulated (PAM) signals and up to 118 GS/s for oversampled signals are shown outperforming previously reported data in terms of sampling rate or data rate, respectively. Two 8-bit sub-DACs up to 59 GS/s with CMOS inverter-based output drivers and pseudo-segmentation provide the analog input data for the 2:1 AMUX realized in current-mode topology. An additional on-chip memory of 256 kB completes the system to a universal arbitrary waveform generator (AWG). At 100 GS/s, the total power consumption is about 4 W. Generally, an AMUX is able to shift the limits of DACs in well-established CMOS technologies toward higher frequencies independent on technology advances and opens a second, conceptual path for achieving higher sampling rates with an additional benefit of a principle bandwidth extension by the AMUX operation.
13 October 2023 in IEEE Solid-State Circuits Letters
To enhance the performance of digital-to-analog converters (DACs), time interleaving by an analog multiplexer (AMUX) provides a powerful concept. Next to an increased sampling rate, potential signal quality improvement as well as a sin(x)/x roll-off shift due to the nonlinear switching operation enabling a true bandwidth extension can be achieved. In this work, an integrated AMUX in a 28-nm CMOS technology is presented. The fundamental roll-off shift is deduced from a general mathematical model. In measurements, the roll-off shift as well as improvements of the edge jitter of pulse-amplitude modulated (PAM) signals due to the AMUX are demonstrated at a sampling rate of 100 GS/s. Compared to single-DAC operation at 50 GS/s, the total edge jitter of a PAM-2 signal can be improved from a standard deviation of about 1.27 ps to about 0.56 ps at 100 GS/s with AMUX operation in the given system. Finally, switching operation of the AMUX at 126 GS/s is shown demonstrating the potential of the concept.
15 September 2023 in IEEE Transactions on Circuits and Systems I: Regular Papers
In high-speed data transmission systems, CMOS digital-to-analog converters (DACs) at very high sampling rates are essential components allowing predistortion of the transmitted signal. Next to compensation of bandwidth limitations of the DAC and assembly, predistortion is also able to compensate other effects originating from time interleaving or from artifacts of the DAC circuit concept. Especially, linear, periodically time-varying (LPTV) effects are one source of impairments in the output signal causing spurious components and their compensation is of particular importance for time-interleaved systems. In this work, a universal predistortion concept including system identification based on the system’s reactions to unit impulses at all corresponding positions in a period is presented and applied to a 28-nm CMOS DAC with time interleaving by an analog multiplexer at sampling rates up to 100 GS/s. Measurements of this DAC reveal LPTV effects with a period of 32 affecting the analog output signal that may be attributed to time interleaving as well as architecture. A theoretical problem description is given and sources of LPTV distortions are identified. Starting from the theoretical description, a universal N:1 predistortion method in time domain is deduced based on a simple system identification method. Measurements of single-tone signals reveal a signal-to-noise and distortion ratio improvement up to 13.5 dB and around 7 dB for a broadband, two-level pulse-amplitude modulated signal at 100 GS/s compared to a linear, time-invariant filter. The proposed predistortion concept is a universal method to compensate for any N:1 LPTV artifacts with significant reduction of LPTV distortions and can be translated to a common transversal filter structure.
4 September 2018 in Advances in Radio Science
An attractive solution to provide several channels with very high data rates of tens of Gbit s −1 for digital-to-analog converters (DACs) in arbitrary waveform generators (AWGs) is to use a high speed serializer in front of the DAC. As data sources, on-chip memories, digital signal processors or field-programmable gate arrays can be used. Here, we present a serializer consisting of a 19 channel 16:1 multiplexer (MUX) for output data rates up to 64 Gbit s −1 per channel and a low skew (∼ 8.8 ps) two-phase frequency divider and clock distribution network that is completely realized in static CMOS logic. The circuit is designed in a 28 nm Fully-Depleted Silicon-on-Insulator (FD-SOI) technology and will be used in an 8 bit 64 GS s −1 DAC between the on-chip memory and the DAC output stage. Due to a four bits unary and four bits binary segmentation, a 19 channel MUX is required. Simulations on layout level reveal a data-dependent peak-to-peak jitter of less than 1.8 ps at the output of one MUX channel with a total average power consumption of approximately 1.15 W of the whole MUX and clock network.