24 March 2021 in Journal of the Optical Society of America B
We numerically investigate innovative comb-like filters working in the telecommunication region based on guided-mode resonances in thick slab waveguide gratings, with emphasis on their resonant properties such as number of resonances, full width at half-maximum, and free spectral range. The slab waveguide gratings with various thicknesses and grating depths are designated and analyzed using a finite-difference time-domain method. Since the slab waveguide is much thicker than the wavelength of operation, a large number of resonances are obtained in the spectral region of interest. By adding an antireflection coating having thickness of quarter-wavelength on the back side of the waveguiding slab, we observe that a usual interference between the directly transmitted zero-order mode and the diffracted order generating the guided mode is eliminated. As a consequence, the sharp resonances and undisturbed comb-like spectra are achieved. The incident and polarization angles, and the surrounding medium’s refractive index influence on the resonant properties are also examined. The guided-mode resonance-based comb-like filters may find applications in optical clocks, optical spectroscopy, optical communications, and lasers. Our systematic investigation provides useful guidelines for designing grating-based frequency comb devices.
27 March 2022 in Communications in Physics
This work reports the optical properties of surface plasmon resonance (SPR) based on the metal-insulator-metal (MIM) structure towards a refractive index sensor. The MIM-SPR structure operating near infrared region consists of lateral periodicity of subwavelength gold patterns placed on a stack of thin silica spacer and silver film (acting as a reflector) on a silicon substrate. The reflection spectra and the electric field distributions of MIM-SPR structures can be tuned by modifying the geometrical properties and have been numerically investigated by using Lumerical’s finite-difference time-domain (FDTD) solutions. The square lattice configuration of 1200 nm to 1400 nm pitch of gold micro-disks of thickness from 80 nm to 120 nm have been conducted. The size of these considered gold patterns, i.e., the diameter of the micro-disks is in the range of 900 nm to 1000 nm. The proposed MIM-SPR structure possessing sensitivity of 370 nm per refractive index unit (RIU), can be applicable for a wide variety of plasmonic sensing, in particular for refractometric biosensors.