9 November 2016 in IEEE Transactions on Nuclear Science
VFVeronique Ferlet-Cavrois
+4
Measuring single-event transient (SET) pulse widths is critical for developing proper mitigation schemes to single-event effects (SEE), especially for advanced technologies. This paper presents a test chip design implementing advanced techniques for measuring SETs implemented in a 28 nm Ultra-Thin Body and Box (UTBB) FDSOI technology. Experimental results of heavy ion and Co-60 irradiation experiments are presented. The heavy ion experiments confirm that this technology has very low SEE sensitivity. Laser test results show that pulse distortion (broadening) plays a key role when evaluating the effect of SETs. Total Ionizing Dose (TID) effects were also evaluated by measuring the Ring Oscillator (RO) frequencies and static current during heavy ion and Co-60 irradiation. Experimental results showed that the RO frequencies degraded up to 10% (heavy ion), and 40% (Co-60) after 1000 krad(Si) irradiation, but the logic in the chip functioned without error.
12 May 2017 in IEEE Transactions on Nuclear Science
A flip-flop circuit hardened against soft errors is presented in this paper. This design is an improved version of Quatro for further enhanced soft-error resilience by integrating the guard-gate technique. The proposed design, as well as reference Quatro and regular flip-flops, was implemented and manufactured in a 65-nm CMOS bulk technology. Experimental characterization results of their alpha and heavy ions soft-error rates verified the superior hardening performance of the proposed design over the other two circuits.