Noor Asniza Murad

Noor Asniza Murad

Auto-generated profile, based on publicly available information

Noor Asniza Murad

Advance RF and Microwave Research Group (ARFMRG), Faculty of Electrical Engineering, Universiti Teknologi Malaysia (UTM), Johor Bahru, Johor, Malaysia

Research Focus & Metrics

Academic Career Length

23Years (2004-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
28 December 2020 in IEEE Access
Verified
Journal Article
Open access
AVArshad Karimbu Vallappil
Arshad Karimbu Vallappil
MRMohamad Kamal A Rahim
Mohamad Kamal A Rahim
BKBilal A Khawaja
Bilal A Khawaja
NMNoor Asniza Murad
Noor Asniza Murad
MMMohammed Gajibo Mustapha
Mohammed Gajibo Mustapha
Due to the rapid development of wireless communication technologies, the number of wireless users are radically increasing. Currently, ~23 billion wireless devices are connected to the internet, and these numbers are expected to increase manifolds in the years to come. The technology growth of the fifth-generation (5G) wireless systems will be needed to meet this high demand of the network. 5G wireless systems offer data-rates of up to 10Gbps, 1-ms latency, and reduced power consumption. It is a known fact that 5G wireless systems will be exploiting beyond the presently used 3 GHz microwave and millimetre-wave (mm-wave) frequency bands. This is the primary driver in the development of the 5G wireless system. Multi-beam Phased array antenna (PAA) systems are typically used in the deployment of 5G systems for high-gain and directionality. In current 5G and future Beyond 5G (B5G) antenna array systems, beamforming networks (BFNs) such as the Butler Matrix (BM) will play a key role in achieving multi-beam characteristics. So, this paper presents an extensive review of the BM based BFNs, and discusses which type of BM will be suitable for the phased array antenna (PAA) systems in the upcoming 5G and next-generation of B5G wireless systems. Moreover, this paper also summarizes the different types of BM designs based on the number of layers. The BMs are classified into the bi-layer, tri-layer, and four-layer structures. It includes different techniques that have been used to solve the problem of crossing, narrow bandwidth, and size reduction of the BM. From the previous studies, it is found that most of the past research work was performed using the bi-layer BM system, whereas the difficult geometries like tri- and four-layer BM are avoided due to their complex fabrication process. It is also found in this paper that the metamaterial (MTM) based bi-layer BM achieves low insertion-loss and phase-error, excellent bandwidth and compact size, and good S-parameter performance, which makes them an ideal BFN candidate for the upcoming 5G and next-generation B5G systems.

22 December 2021 in IEEE Access
Verified
Journal Article
Open access
TFTamara Z. Fadhil
Tamara Z. Fadhil
NMNoor Asniza Murad
Noor Asniza Murad
MRMohamad Kamal A Rahim
Mohamad Kamal A Rahim
MHM. R. Hamid
M. R. Hamid
LNLevy Olivia Nur
Levy Olivia Nur
This article presents a hybrid metasurface split beam antenna for fifth-generation (5G) mobile applications at 3.5 GHz. Multi-beam antennas with high directivity are required for a 5G mobile network. It can be achieved by having an array antenna. Using an antenna array at low frequency increases the complexity and size of the whole network. Therefore, a metasurface (MS) is proposed to direct surface current and to have high gain and multibeam properties. To achieve that, a square split ring resonator (SSRR) and U-shaped unit cell metasurface is implemented as a superstrate to a single square patch antenna. The manipulation of this hybrid metasurface configuration can create opposite current flow on the unit cell and thus split the beam. The hybrid metasurface superstrate and antenna are fabricated on FR-4 ( $\varepsilon \text{r}\,\,=4.4$ , tan $\delta =0.02$ ). Results show that the antenna resonates well at 3.5 GHz, with a less than −10 dB reflection coefficient. The arrangement of the unit cells on the superstrate metasurface is able to split the current, and thus the radiation pattern beam is split into two beams in the E-plane at ± 45°. This antenna is a good candidate for future 5G Pico cell base stations in urban or suburban areas with high capacity and interferences.

18 August 2022 in IEEE Access
Verified
Journal Article
Open access
ASAbdulkadir Bello Shallah
Abdulkadir Bello Shallah
Farid ZubirFarid Zubir
Farid Zubir
MRMohamad Kamal A Rahim
Mohamad Kamal A Rahim
Huda Bin MajidHuda Bin Majid
Huda Bin Majid
USUsman Ullah Sheikh
Usman Ullah Sheikh
ZYZubaida Yusoff
Zubaida Yusoff
Beamforming networks for multiple beam antennas are believed to be in the vanguard of technological developments in mmWave for 5G wireless applications. The basic idea of beamforming technique is the application of multiple antenna elements radiating the same signal at an identical phase and wavelength, into one strong signal pointed to a specific direction. For low cost and power consumption, radio frequency beamforming networks (RF-BFNs) such as Blass matrices, Butler matrices, and Nolen matrices will play a critical role in achieving the ever-increasing demands in wireless technology. Therefore, this study aims to present a comprehensive survey and developments of RF-BFNs with (particular focus in Butler matrices). From the fundamental perspectives of the beamforming techniques and progress over time, component evolution includes branch-line coupler (BLC), Phase shifter (PS), and Crossovers to complete system Butler matrix (BM) integration. Different design techniques to improve bandwidth, size reduction, multi-band, and other performance characteristics are discussed extensively. Furthermore, the paper also discusses different geometry of Butler matrices in open microstrip transmission lines, substrate integrated waveguide (SIW) and gap waveguide (GWG) technologies highlighting key developments and research challenges from single band to dual-band operations. We expect this paper to provide more profound insights into the designs processes and suggest suitable ways to facilitate further developments of RF-beamforming networks at mmWave and sub-mmWave frequency ranges.

24 February 2021 in IEEE Access
Verified
Journal Article
Open access
MJMohd Ezwan B Jalil
Mohd Ezwan B Jalil
MRMohamad Kamal A Rahim
Mohamad Kamal A Rahim
Mohamed HimdiMohamed Himdi
Mohamed Himdi
NSNoor Asmawati Samsuri
Noor Asmawati Samsuri
NMNoor Asniza Murad
Noor Asniza Murad
BNBambang Setia Nugroho
Bambang Setia Nugroho
This paper aims to produce a high data capacity and miniaturized flexible chipless RFID tag based on the frequency signature using the Modified Complementary Split Ring Resonator (MCSRR). The proposed 19 bits chipless RFID tag using the frequency shifting technique consists of five slotted overlaying MCSRR with Different Width (MCSRR with DW) structures and the dimension of 48 mm $\times48$ mm. The structure is designed by using a flexible (Polyethylene Terephthalate ) PET substrate with permittivity of 0.2. The operating frequency is between 0.9 GHz and 2.7 GHz. The advancement of slotted overlaying MCSRR with DW structures has successfully miniaturized the chipless RFID tag structure to about $107~{\mathrm {mm}}^{2}$ / bit, $0.02\lambda _{mid}^{2}/\mathrm {bit}$ and 0.09 GHz/bit by maximizing the number of resonators in a limited space and minimizing the frequency separation between the resonators. The omnidirectional tag antenna is incorporated with the proposed MCSRR structure using the retransmission measurement method. The log-periodic antenna with a gain of 5–7 dBi is used for this measurement to improve the range distance between tag and reader system. Based on the retransmission measurement involving the antenna tag, the 19 bits chipless RFID tag which consists of five MCSRR with DW structures can be detected with a maximum range distance of 30 cm and a power transmitted level of 30 dBm.

10 February 2025 in IEEE Access
Verified
Journal Article
Open access
MAMuhammad Athallah Adriansyah
Muhammad Athallah Adriansyah
AWAditya Inzani Wahdiyat
Aditya Inzani Wahdiyat
IFIsmi Rosyiana Fitri
Ismi Rosyiana Fitri
NMNoor Asniza Murad
Noor Asniza Murad
CACatur Apriono
Catur Apriono
Phased array antennas play a critical role in satellite communication systems, where minimizing peak sidelobe levels (PSLL) is essential to prevent interference and enhance signal quality. This paper presents a novel hybrid optimization approach, grey wolf optimizer with Nelder-Mead local search (GWO-NM), to suppress PSLL effectively in both linear antenna arrays (LAA) and planar antenna arrays (PAA). The proposed method combines the global search capability of greywolf optimizer (GWO) with the Nelder-Mead local refinement to address the PSLL suppression challenge. The optimization process was applied to both 32-element and 100-element LAA, achieving PSLL reductions to -52.63 dB and -56.39 dB, respectively, and these results are also extended to the corresponding PAA configuration. The results were further validated through full-wave electromagnetic simulations in CST Microwave Studio 2024, considering practical effects such as mutual coupling and material losses. Also, this suppression comes with trade-offs, including a widened first null beamwidth from 18.34° to 19.78° for the 32-element arrays and from 6.47° to 9.71° for the 100-element arrays in both LAA and their corresponding PAA compared the conventional algorithm, along with a marginal decrease of 0.5-1 dB in directivity observed in electromagnetic simulations. The GWO-NM algorithm outperformed other metaheuristic optimization techniques, including PSO, ACO, CSO, ABCO, and conventional GWO, demonstrating superior sidelobe suppression across different array configurations while maintaining an acceptable trade-off with other key radiation parameters.

1 October 2016
Verified
Conference Paper
Closed access
MRMohamad Kamal A Rahim
Mohamad Kamal A Rahim
MHM. R. Hamid
M. R. Hamid
NSNoor Asmawati Samsuri
Noor Asmawati Samsuri
NMN. A. Murad
N. A. Murad
MYM. F. M. Yusoff
M. F. M. Yusoff
Huda Bin MajidHuda Bin Majid
Huda Bin Majid
Frequency reconfigurable antennas gain interest especially in future wireless communication systems due to flexibility in many applications. This paper reviews three different configurations of frequency reconfigurable antenna. The first configuration is the narrowband to narrowband frequency reconfigurable using slot type of antenna and microstrip antenna. The second configuration is the wideband to narrowband frequency reconfigurable antenna, planar monopole contribute to the wideband characteristic while a slot antenna is for narrowband. The third configuration used tunable electromagnetic band-gap (EBG) to configure the band notched frequency. The designed structures simulated performances and analysis are discussed in this paper. The analysis is also focused on the performance of the diode as a switch to reconfigure the frequencies.