The aim of this study was an in-situ synthesis of hydroxyapatite (HA) on cellulose fibers to be used as a new reinforcing agent for dental restorations. The microwave irradiation method was used for synthesis and the materials were characterized with analytical techniques. The prepared dental resin composites were mechanically tested by a universal testing machine and electrodynamic fatigue testing system. FTIR, XRD, SEM/EDS analysis confirmed the successful synthesis of HA on cellulose fibers. The Alamar blue biocompatibility assay showed more than 90% cell viability for the prepared cellulose/HA. The mechanical properties of resin composites improved with cellulose content from 30 wt.% to 50 wt.% in the polymer matrix. Substantially, increasing the cellulose/HA content from 40% to 50% improved the mechanical properties. The results suggested that HA could be successfully synthesized on cellulose fibers using microwave irradiation and contributed to improving the mechanical properties of dental resin composites.
The conventional attendance system consists of registers marked by teachers which leads to human error and a lot of maintenance. Time consumption is an important point of concern in this system. We have thought of revolutionize it using available digital tools in the modern era i.e. FACE RECOGNITION. Our project will ensure more precision and negligible manual work. The project is revolutionized in order to overcome the problems of conventional system. Face recognition and then marking the attendance is our project all about. The database of all the students in the class is stored in a folder and when the face of the individual student matches with one of the faces stored image, attendance is marked else the face is ignored and attendance not marked. In our project, face recognition (Machine Learning) technology is used .Inside this Histogram of Oriented Gradient for face detection and SVM Classifier for name recognition is used. The model has an accuracy of 99.38% on the Labelled Faces in the Wild benchmark.
10 January 2020 in Periodica Polytechnica Civil Engineering
In this research high speed milling was carried out on particles of brown coal raw fly ash, on second layer, and on third layer particles obtained from wet separation of brown coal raw fly ash. Due to milling process, median particle size d50 of raw fly ash, second layer, and third layer reduced by 46 %, 23 %, and 77 %, densities reduced by 11 %, 17 %, and 8 % respectively. Due to milling process, formation of agglomerations was observed, the standard deviation of the chemical composition of each element from the mean value reduced. After milling, high volume cementitious paste mixes were prepared with 60 % cement replacement. Due to the milling process the increase in compressive strength at 28 and 90 days was observed for raw fly ash is 59 % and 16 %, for second layer is 12 % and 15 %, for third layer and milled third layer is 78 % and 75 %. Flexural strength testing showed that due to the milling process the deflections at maximum loads have reduced considerably leading to brittle behavior of milled cementitious specimens. The testing for Mercury Intrusion Porosimetry showed that the cementitious specimens of third layer have maximum concentration of large capillary pores between 0.05 and 10 µm, whereas, all others have maximum concentration of medium capillary pores between 0.01 and 0.05 µm. Autogenous shrinkage of cementitious specimens was measured for first sixteen hours after mixing which showed that the second layer particles have the least shrinkage as compared to all other specimens.
In this work, we have investigated the precursor effects to superconductivity in BaPb$_{0.75}$Bi$_{0.25}$O$_3$ using temperature dependent resistivity, x-ray diffraction technique and photoemission spectroscopy. The present compound exhibits superconductivity around 11 K ($T_C$). The synthesis procedure adopted is much simpler as compared to the procedure available in the literature. In the temperature range (10 K-25 K) i.e. above $T_C$, our results show an increase in both the orthorhombic and tetragonal strain. The well screened features observed in Bi and Pb 4$f_{7/2}$ core levels are indicative of the metallic nature of the sample. The compound exhibits finite intensity at the Fermi level at 300 K and this intensity decreases with decrease in temperature and develops into a pseudogap; the energy dependence of the spectral density of states suggests disordered metallic state. Furthermore, our band structure calculations reveal that the structural transition upon Pb doping results in the closing of the band gap at the Fermi level.