Key Laboratory of Education Ministry for Modern Design & Rotor-Bearing System, Theory of Lubrication and Bearing Research Institute, Xi’an Jiaotong University, Xi’an 710049, China
Auto-generated profile, based on publicly available information
Junhong Mao
Key Laboratory of Education Ministry for Modern Design & Rotor-Bearing System, Theory of Lubrication and Bearing Research Institute, Xi’an Jiaotong University, Xi’an 710049, China
To improve the wear monitoring accuracy of steel tribo-pairs, a ferromagnetic particle sensor that consists of a magnetic loop with two cylindrical magnetic poles and one magnetic housing is proposed. The induction coil is placed inside the magnetic poles to shield against external electromagnetic interference. The air gap is designed to 1 mm between the two magnetic poles, where a rotational symmetric high-gradient static magnetic field will be generated under constant direct current (dc) drive. The sine-wave-like signal of one period will be induced when one ferromagnetic particle flows through the sensor. The working principle of the sensor and the internal magnetic field distribution is explained by establishing a mathematical model and finite element analysis (FEA). Furthermore, the results about the effects of coil length and position show that the output voltage is not sensitive to the axial mounting positions of the induction coil, and a shorter inductive coil produces a larger output voltage. By the oil dynamic monitoring experiment, the sensor can distinguish 13- $\mu \text{m}$ ferromagnetic particles in an oil tube of 10-mm inner diameter. With its high sensitivity to ferromagnetic particles, the sensor is suitable for online wear monitoring of steel tribo-pairs.
As the rotational speed of conventional rotor systems supported by oil-film bearings has increased, vibration problems such as oil whip and oil whirl have become apparent. Our group proposed the use of active magnetic bearings (AMBs)/bearingless motors (BELMs) to stabilize these systems. In such a system, measuring the variable stiffness and damping of the oil-film bearings, the current-force and displacement-force parameters of the AMBs/BELMs, and the residual unbalanced force is necessary to satisfy the stability of the rotor system. These parameters are the foundation for the rotor dynamics analysis and optimization of the control strategy. In this paper, we propose a method to simultaneously identify the parameters of the oil-film bearings and AMBs/BELMs along with the residual unbalanced forces during the unbalanced vibration of the rotor. The proposed method requires independent rotor responses and control currents to form a regression equation to estimate all the unknown parameters. Independent rotor responses are realized by changing the PID control parameters of the AMBs/BELMs. Numerical simulation results show that the proposed method is highly accurate and has good robustness to measurement noise. The experimental results show that the unknown parameters identified by the responses generated by different controller parameters are similar. To confirm that the identification results are correct, verification experiments were carried out. The vibration amplitude of the rotor was successfully suppressed by applying a force to the rotor in the opposite direction to the residual unbalanced force. The frequency response characteristics and unbalanced responses of the rotor estimated by the values of the parameters identified show good consistency with the measured results.
26 July 2021 in IEEE Transactions on Instrumentation and Measurement
Extraction of lube oil wear debris morphological features is an important means for real-time monitoring of equipment wear, and online visual ferrograph (OLVF) is one of the representative technologies. In the current OLVF wear monitoring, the transmission ferrogram (TF) is basically relied on, but the more informative reflection ferrogram (RF) has not yet been applied, because its complex surface color distribution and bubble interference make it difficult to segment the RF. Accordingly, a convolutional neural network (CNN) model called lightweight residual U-net (Res-UNet) is constructed in this article. Simultaneously, with both RFs and TFs, an automatic labeling method is proposed to label the RFs and make a training dataset to implement network training. The experimental results demonstrate that the trained network can achieve accurate segmentation of RFs with excellent anti-interference performance. The proposed method lays the foundation for the feature extraction of reflection OLVF ferrograms and provides an alternative image segmentation method for other image wear debris sensors.
Estimation of the dynamic parameters of bearings is essential in order to be able to interpret the performance of rotating machinery. In this paper, we propose a method to estimate the dynamic parameters of the bearings in a flexible rotor system. By utilizing the electromagnetic excitation generated by a built-in PM motor and finite element (FE) modeling of the rotor, safe, low-cost, and real-time monitoring of the bearing dynamics can be achieved. The radial excitation force is generated by injecting an alternating d-axis current into the motor windings. The FE model of the rotor and the measured frequency responses at the motor and bearing locations are used to estimate the dynamic parameters of the bearings. To evaluate the feasibility of the proposed method, numerical simulation and experiments were carried out on a flexible rotor system combined with a bearingless motor (BELM) having both motor windings and suspension windings. The numerical simulation results show that the proposed algorithm can accurately estimate the dynamic parameters of the bearings. In the experiment, the estimates made when utilizing the excitation force generated by the motor windings are compared with the estimates made when utilizing the excitation force generated by the suspension windings. The results show that most of the stiffness and damping coefficients for the two experiments are in good agreement, within a maximum error of 8.92%. The errors for some coefficients are large because the base values of these coefficients are small in our test rig, so these coefficients are sensitive to deviations. The natural frequencies calculated from the dynamic parameters estimated from the two experiments are also in good agreement, within a maximum relative error of 3.04%. The proposed method is effective and feasible for turbomachines directly connected to motors, which is highly significant for field tests.
Through real-time acquisition of the visual characteristics of wear debris in lube oil, an on-line visual ferrograph (OLVF) achieves online monitoring of equipment wear in practice. However, since a large number of bubbles can exist in lube oil and appear as a dynamically changing interference shadow in OLVF ferrograms, traditional algorithms may easily misidentify the interference shadow as wear debris, resulting in a large error in the extracted wear debris characteristic. Based on this possibility, a jam-proof uniform discrete curvelet transformation (UDCT)-based method for the binarization of wear debris images was proposed. Through multiscale analysis of the OLVF ferrograms using UDCT and nonlinear transformation of UDCT coefficients, low-frequency suppression and high-frequency denoising of wear debris images were conducted. Then, the Otsu algorithm was used to achieve binarization of wear debris images under strong interference influence.
14 July 2016 in Science China Technological Sciences