23 March 2006 in Measurement Science and Technology
1 March 2020 in Journal of Aerosol Science
8 February 2016 in Journal of Physics D: Applied Physics
Temperatures in an air plasma jet were measured using a tomographic experimental arrangement providing time-resolved scans of plasma optical radiation in the spectral band 559–601 nm from two directions. The acquired data and subsequent processing yielded time-resolved temperature distributions in measurement planes perpendicular to the plasma jet axis with a temporal resolution of 1 μs. The measurement system and evaluation methods afforded detailed information about the influence of high-frequency ripple modulation of the arc current on plasma temperature.
6 August 2012 in IEEE Transactions on Plasma Science
Multidirectional optical diagnostics combined with fast Fourier transform analysis yielding frequency spectra were used for investigations of oscillation phenomena in a thermal plasma jet on various frequencies. The results show that oscillation amplitude distributions in the plane perpendicular to the jet axis depend on the frequency value and, for some frequencies, are strongly asymmetrical. This phenomenon affects the mean distribution of instabilities in a different way, depending on the frequency range. Instantaneous instability distributions are influenced by the phase of arc-current low-frequency modulation.
27 November 2012 in Journal of Physics D: Applied Physics
Dynamics of thermal plasma jets is characterized by significant turbulent phenomena influencing various technological applications. In two types of experiments, we have analysed (i) tomographical reconstructions of plasma jet radiation captured from four sides by photodiode arrays in two planes perpendicular to the jet axis and (ii) recordings of the jet radiation acquired by a high-speed CCD camera. The analysis was based on the method of generalized correlation dimension stemming from the correlation dimension estimates by the Grassberger–Procaccia algorithm common in the domain of nonlinear dynamic systems. Our results map spatial distributions of complexity within recorded data including their temporal evolution and provide more information about the jet dynamics than, e.g., calculations of standard deviations. The most stable region of the plasma jet was identified at a small distance from the jet axis and the most turbulent region about 4 mm from the plasma torch nozzle. Signs of short-time collective rotational movement of the jet core were also identified.
25 June 2014 in Journal of Physics D: Applied Physics
A cutting plasma torch was observed in several ways by a high-speed camera with a focus on the cathode area. In the first experiment, the plasma arc between the nozzle tip and anode was recorded in a series of duty cycles ranging from new unworn cathodes to cathode failure due to wear and material loss. In the second experiment, we used a specially modified nozzle to observe the inside area between the cathode and the nozzle exit through a fused silica window. Finally, using tilted view, we observed a pool of molten hafnium at the cathode tip during the plasma torch operation. The process of cathode material melting, droplet formation, their expulsion and rate of cathode material loss was examined.