31 December 2019 in IEEE Transactions on Intelligent Transportation Systems
This paper presents an efficient mutual interference suppression method using wavelet denoising in automotive radar systems. When a radar signal transmitted from another radar-equipped vehicle flows into our radar system, it acts as an interference signal and degrades the target detection performance. With wavelet denoising, the interference signal can be extracted from the time-domain low-pass filter output. Then, the effect of the interference can be mitigated by subtracting the interference signal from the original low-pass filter output. As a result, the beat frequency containing the target information can be estimated accurately. Simulation results show that the proposed method can enhance the estimation accuracy of the target's distance, velocity, and angle. In addition, the performance of the proposed method is verified through actual experiments using heterogeneous radars. In the measurement results, even though the exact specifications of the radar signal transmitted from the other vehicle are not identified, the interference is effectively suppressed. Unlike other existing methods, the proposed method using wavelet denoising does not need to generate a specific radar waveform and it can mitigate interference only by signal processing without changing the existing hardware.
30 January 2020 in South African Journal of Business Management
Purpose: Entrepreneurship can offer a competitive advantage to an enterprise through risky decisions that pay off in the development of innovative products, services and markets in a difficult managerial environment and by moving proactively to dominate a competitive market. This study aims to examine the relationship between entrepreneurship and managerial innovation capacity by considering subfactors, such as innovativeness, proactiveness and risk-taking, as well as to explore the relationship between managerial innovation capacity and management performance. The study determines the extent to which policy finance and management support for small and medium-sized enterprises (SMEs) play the role of moderating variables.Design/methodology/approach: Data collection was carried out in 820 SMEs. To verify the hypotheses, Covariance Structure Analysis was conducted using EQS6b.Findings/results: The findings indicate that entrepreneurship has a significant influence on strategic planning, research and development, and technology commercialisation. This study found that managerial innovation capacities have positive effects on management performance. In addition, this study confirmed that when entrepreneurship affects managerial innovation activities, policy financial support and management support serve as moderators.Practical implications: Small and medium-sized enterprises should enhance their innovation capacity and expand innovative entrepreneurship and policy finance to achieve competitiveness, survive and show continuous development and growth in a changing environment.Originality/value: The study provides SMEs with information they can use to increase their awareness of internal managerial innovation activities, which are the original sources of competitive advantage, and help promote research and development (RD) and organizational management for continuous reinforcement of innovation capacity. the study provides SMEs with information they can use to increase their awareness of internal managerial innovation activities, which are the original sources of competitive advantage, and help promote RD and organizational management for continuous reinforcement of innovation capacity.
27 November 2018 in IEEE Antennas and Wireless Propagation Letters
In recent years, ray-tracing simulation is widely adopted to model outdoor radio propagation. However, existing studies have not focused on the blockage effect of roadside trees. In this study, we model roadside trees using a variety of techniques to analyze their effect on the accuracy of channel modeling using ray-tracing simulation. The roadside trees were modeled as objects transmitting, reflecting, and diffracting electromagnetic waves. We noted that the results of ray-tracing simulations that included roadside trees were more accurate than simulations without tree effects, based on the deviations from the experimentally measured results.
11 September 2019 in IEEE Sensors Journal
This study proposes a new method to estimate room shape using radio waves. Unlike existing heuristic methods, the proposed method uses accumulated radio channel data and the neural network to predict room shapes. The radio channel data is generated by three dimensional (3D) ray tracing simulation and actual measurements. The neural network used the channel data for the training process. After training the neural network, we evaluated the performance variation resulting from changes in the channel environment parameters used in the neural network training, the size of the room, hyperparameters of the neural network, and the location of the transceivers. The results showed that better performance was observed when more sets of channel parameters were used as inputs to the neural network. In addition, the results obtained from measurements show that the estimation of the room shape through the neural network works well not only in the simulation but also in the real world.
1 December 1998 in Japanese Journal of Applied Physics
In this study, 0.3–0.5 µm deep silicon trenches were etched using Cl2/10%N2 and Cl2/50%HBr inductively coupled plasmas, and the defects remaining on the etched silicon trench surfaces and the effects of various annealing and oxidation on the removal of the defects were studied. High resolution transmission electron microscopy was used to investigate the degree of remaining defects and X-ray photoelectron spectroscopy was also used to investigate surface contamination of the etched silicon wafers. Defects were found on the silicon trench surfaces etched using both Cl2/10%N2 and Cl2/50%HBr. A thermal oxidation of 200 Å at the temperature up to 1,100°C did not remove the remaining defects completely and more defects were remained on the silicon trench etched using Cl2/10%N2. More defects remaining on the oxidized silicon trench for Cl2/10%N2 appear to be related to the formation of silicon oxynitride on the silicon trench etched in Cl2/10%N2, therefore, forming less thermal oxide during the oxidation process. The annealing of the etched silicon trenches from 900°C to 1,000°C for 30 min in N2 also decreased the number of defects, however, to remove the defects formed in our experiments, the annealings at the temperature higher than 1,000°C in N2 for 30 min appears to be required. A combination process of annealing at 1,000°C and oxidation at 900°C was also effective in removing the defects completely.