Recent years have witnessed emerging oscillation stability issues in DC microgrid via power electronic converters. Considering the confidentiality of the parameters and structure of power electronic devices, the impedance method is widely used to study the small signal stability. However, the stability assessment based on traditional impedance model and Gershgorin Theorem have some shortcomings for multiple converters DC microgrid. This may lead to the problem that the stability analysis results are not accurate enough or the criteria cannot be applied. In this article, the system is modeled as a medium and high dimensional negative feedback system. Further, a sufficient stability criterion based on extended Gershgorin Theorem is developed through reshaping the range of eigenvalues estimation for the non-diagonal advantage system. Finally, the validity of the criterion is verified by a 6 converters system. Test results indicate the proposed method has the potential to assess the high-order system stability with low computational complexity. Moreover, its low conservatism as a sufficient criterion is helpful to guide the system design.
25 December 2024 in IEEE Transactions on Sustainable Energy
The stability issue of high proportion variable renewable energy (VRE) when connected to the grid has become an important factor limiting the consumption of VRE and seriously threatening the stable operation of the power systems. However, there is still a lack of targeted discrimination theory and compensation mechanisms in areas where the stability margin undergoes drastic changes due to changes in the static operating point of the systems. To this end, based on the small signal stability analysis method, this paper proposes a vulnerable nodes localization method for the multiple grid-connected converter systems (MGCCS) that considers the dynamic response characteristics and static operating point offset of converters. Firstly, a frequency domain negative feedback model is established for MGCCS with passive busbars. Then the sensitivity function for the control parameters of active nodes and the quantitative indicators for identifying vulnerable nodes are derived. Finally, a comprehensive compensation scheme for both active nodes and passive busbars is proposed. Case analysis demonstrates that the proposed vulnerable nodes identification method and comprehensive compensation scheme offer substantial benefits in the realm of stability design and operation planning of MGCCS.
1 January 2026 in IEEE Transactions on Sustainable Energy