Growing coaxial nanotubes: Heterostructures of highly crystalline two-dimensional materials such as graphene, hexagonal boron nitride (hBN), and molybdenum disulfide (MoS 2 ) are now routinely assembled from films or grown as layers. Xiang et al. report the growth of one-dimensional analogs of these heterostructures on single-walled carbon nanotubes (SWCNTs) through a chemical vapor deposition (see the Perspective by Gogotsi and Yakobson). Single-crystalline monolayers or multilayers of hBN or MoS 2 were grown that maintained the electrical conductivity of the SWCNT. A monolayer of MoS 2 was grown on a trilayer of hBN that encapsulated a SWCNT. Science , this issue p. 537 ; see also p. 506
Triflic acid dispersed in an apolar solvent exhibited a superior doping effect and stability on carbon nanotube electrodes. The carbon nanotube electrode-based perovskite solar cells exceeded the metal electrode-based counterpart in terms of efficiency.
Synthesis of single-walled carbon nanotubes (SWNTs) with well-defined atomic arrangements has been widely recognized in the past few decades as the biggest challenge in the SWNT community, and has become a bottleneck for the application of SWNTs in nano-electronics. Here, we report a selective synthesis of (12, 6) SWNTs with an enrichment of 50%–70% by chemical vapor deposition (CVD) using sputtered Co–W as a catalyst. This is achieved under much milder reduction and growth conditions than those in the previous report using transition-metal molecule clusters as catalyst precursors (Nature, 2014, 510, 522). Meanwhile, in-plane transmission electron microscopy unambiguously identified an intermediate structure of Co6W6C, which is strongly associated with selective growth. However, most of the W atoms disappear after a 5 min CVD growth, which implies that anchoring W may be important in this puzzling Co–W system.
This study reports improved performance of inverted organic solar cells by using high working-pressure sputtered ZnO. Sputtering produces highly crystalline ZnO without the need for thermal annealing. However, photovoltaic devices fabricated by using sputtered ZnO have shown lower power conversion efficiencies than those made by using sol–gel ZnO. On the other hand, sol–gel ZnO limits the flexible application of inverted organic solar cells because of high-temperature annealing. Therefore, a new method of sputtering under high working pressure is developed. The power conversion efficiency of inverted organic solar cells fabricated using this high working-pressure-sputtered ZnO (η = 8.6%, VOC = 0.77 V, JSC = 15.6 mA cm−2, and FF = 0.72) is superior to that of conventional sol–gel ZnO-based devices (η = 7.8%, VOC = 0.73 V, JSC = 16.0 mA cm−2, and FF = 0.63). Furthermore, utilizing the low temperature process of sputtering, flexible application is successfully achieved using polyethylene terephthalate indium tin oxide films.