This paper proposes a new photonic-based non-invasive device for managing of Diabetic Foot Ulcers (DFUs) for people suffering from diabetes. DFUs are one of the main severe complications of diabetes, which may lead to major disabilities, such as foot amputation, or even to the death. The proposed device exploits hyperspectral (HSI) and thermal imaging to measure the status of an ulcer, in contrast to the current practice where invasive biopsies are often applied. In particular, these two photonic-based imaging techniques can estimate the biomarkers of oxyhaemoglobin (HbO2) and deoxyhaemoglobin (Hb), through which the Peripheral Oxygen Saturation (SpO2) and Tissue Oxygen Saturation (StO2) is computed. These factors are very important for the early prediction and prognosis of a DFU. The device is implemented at two editions: the in-home edition suitable for patients and the PRO (professional) edition for the medical staff. The latter is equipped with active photonic tools, such as tuneable diodes, to permit detailed diagnosis and treatment of an ulcer and its progress. The device is enriched with embedding signal processing tools for noise removal and enhancing pixel accuracy using super resolution schemes. In addition, a machine learning framework is adopted, through deep learning structures, to assist the doctors and the patients in understanding the effect of the biomarkers on DFU. The device is to be validated at large scales at three European hospitals (Charité–University Hospital in Berlin, Germany; Attikon in Athens, Greece, and Victor Babes in Timisoara, Romania) for its efficiency and performance.
In this work, we demonstrate that in a regime of strong modulation, by generating pulses of the length of the order of a few cavity lifetimes (hundreds of ps), a broadband quantum cascade laser can be driven to lase on a bandwidth (250 cm−1) limited by the gain. In addition, the amplitude noise of the radiation was shown to be limited by the detector. A laser linewidth study has been performed under different operating conditions, finding values spanning from 20 to 800 MHz, indicating a trade-off between emission bandwidth, amplitude stability, and coherence. The pulsed intensity of the output arises from the gain switching dynamics of the laser, while the self-seeded nature of the emission is responsible for the low amplitude noise and the relatively narrow linewidth of the individual spectral lines of the multimode emission.
11 August 2022 in Expert Systems with Applications
We demonstrate quantum cascade laser (QCL) optical frequency combs emitting at λ ∼ 6 μm. A 5.5 μm-wide, 4.5 mm-long laser exhibits comb operation from −20 °C up to 50 °C. A maximum output power of 300 mW is achieved at 50 °C showing a robustness of the system. The laser output spectrum is ∼80 cm−1 wide at the maximum current, with a mode spacing of 0.334 cm−1, resulting in a total of 240 modes with an average power of 0.8 mW per mode. To achieve frequency comb operation, a plasmonic-waveguide approach is utilized. A thin, highly-doped indium phosphide (InP) layer is inserted in the top cladding design to compensate the positive dispersion of the system (material and waveguide). This approach can be further exploited to design QCL combs at even shorter wavelengths, down to 4 μm. Different ridge widths between 2.8 and 5.5 μm have been fabricated and characterized. All of the devices exhibit frequency comb operation. These observations demonstrate that the plasmonic-waveguide is a robust and reliable method for dispersion compensation of a semiconductor laser systems to achieve frequency comb operation.