9 June 2021 in IEEE Transactions on Energy Conversion
In order to study the problem of the high temperature reached by the end windings, caused by the high current in the armature windings of permanent magnet synchronous motors (PMSM), a 560 kW gas and liquid cooling PMSM used for a compressor is analyzed. The heat source is obtained by a two-dimensional numerical analysis of the electromagnetic field. A three-dimensional fluid-solid coupling heat transfer model is established. Under the action of the cooling medium, one-quarter of the PMSM structure is numerically simulated. The temperature distribution of the 560 kW PMSM is studied, including rotor rotation. The temperature distribution of the PMSM armature winding and the distribution of fluid around the winding under different inlet air flow speeds are analyzed. The calculated values of the end winding temperature at different currents are compared with the experimentally measured values. The rationality of the three-dimensional fluid-solid coupling heat transfer model and the correctness of the calculation method are verified. This paper provides both the analysis and the computation scheme of the fluid-solid heat transfer of the PMSM.
23 December 2021 in IEEE Transactions on Energy Conversion
Aiming at the problem of high winding temperature caused by the large armature winding current of permanent magnet synchronous motor (PMSM) for compressors, a 560 kW PMSM for a compressor was studied. The three dimensional global fluid-heat coupled heat transfer model is established and is discretized by the polyhedral mesh. The fluid and thermal coupling field of a permanent magnet motor are numerically calculated when the rotor rotation is considered. The temperature distribution characteristics of the end windings at different positions are analyzed. Further, the structure of the motor cooling system is improved. The effects of different ventilation modes on the temperature distribution of the motor are compared and analyzed. The temperature distribution of the stator windings under different armature currents is calculated. The calculation results of the end winding temperature are compared with the measured data, verifying the correctness of the calculation method. Conclusions have been obtained that are helpful to the design and operation of the compressor water-cooled permanent magnet synchronous motor.
18 July 2019 in The Journal of General Psychology
In recent years, suicidal behavior among doctors has gained increasing research attention. The main effects of job stress and social support on suicidal ideation (SI) have been publicly documented, but their interactive effects on SI have not been well studied, particularly among clinicians of county hospitals in China. A cross-sectional study with a sample of 352 clinicians of county hospitals in Guangxi was thus conducted, measuring their SI, job stress, and social support. Results indicated that 56 (15.9%) individuals reported SI during the previous week, with males accounting for 6.8% and females 9.1%. Job stress was positively correlated with SI, whereas family, friend, and colleague supports were negatively correlated with SI. Multiple hierarchical regression analysis showed that colleague support was a significant moderator on the relationship between job stress and SI among clinicians, but family and friend supports were not. In conclusion, SI among clinicians of county hospitals is common and should become a target of prevention. Perceived support from colleagues is more important than that from family and friends in alleviating the influence of job stress on SI. The results also suggested that social support programs encouraging the participation of superiors and colleagues may be greatly effective in the prevention of clinicians’ stress and SI.
1 July 2026 in IEEE Transactions on Industrial Electronics
13 October 2023 in Ocean Engineering
25 November 2025 in IEEE Transactions on Transportation Electrification
Magnetic lead screws (MLSs), also known as trans-rotary magnetic gears (TROMAGs), enable contactless bidirectional conversion between rotary and linear motion through magnetic coupling. Compared with conventional linear actuators, MLSs offer higher thrust force density and improved reliability, making them promising for linear motion applications. This article presents a comprehensive review of high-performance MLS technologies. The operating principle of MLSs is first introduced, followed by a systematic classification of MLS topologies based on excitation sources and a comparative analysis of their structural features and performance tradeoffs. A universal design optimization and analysis framework is then proposed, encompassing analytical methods, control strategies, and performance metrics. Advanced manufacturing techniques are subsequently discussed in relation to performance, complexity, and fabrication. Typical application scenarios are further analyzed based on functional requirements, and suitable MLS types and manufacturing methods are recommended accordingly. Finally, key technical challenges and future research directions are outlined to support the continued advancement of MLS technology.