28 February 2011 in Journal of Materials Chemistry
Aqui… Onde a terra termina e o mar já não começa —A poetic definition of a binary liquid/solid interface by Luís de Camões (1572). Since its birth in early 1990s, Li ion battery technology has been powering the rapid digitization of our daily life and finally made its debut in 2010 into the large format application for electrified vehicles such as the Nissan Leaf and GM Chevrolet Volt; however, much of the chemistry and processes underneath this amazing energy storage device still remain to be understood, among which is the interphase between electrolyte and electrodes. Interphases are formed in situ on electrode surfaces from sacrificial decomposition of electrolytes. Their ad hoc chemistry supports the reversible Li+-intercalation in both anode and cathode materials at extreme potentials, while preventing parasitic reductions/oxidations on the reactive surfaces of those electrodes; but their existence places restrictions on energy and power densities of the device by impeding Li+-transport and setting operating voltage limits, respectively. It has been the dream of battery engineers to maximize the former and minimize the latter. This review summarizes the most recent knowledge about the chemistry and formation mechanism of this elusive battery component on both anode and cathode surfaces. The attempts to tailor a desired interphasial chemistry via diversified means were also discussed.
1 May 2013 in The Journal of Physical Chemistry Letters
10 April 2024 in Nature Communications
Constructing an artificial solid electrolyte interphase (SEI) on lithium metal electrodes is a promising approach to address the rampant growth of dangerous lithium morphologies (dendritic and dead Li0) and low Coulombic efficiency that plague development of lithium metal batteries, but how Li+ transport behavior in the SEI is coupled with mechanical properties remains unknown. We demonstrate here a facile and scalable solution-processed approach to form a Li3N-rich SEI with a phase-pure crystalline structure that minimizes the diffusion energy barrier of Li+ across the SEI. Compared with a polycrystalline Li3N SEI obtained from conventional practice, the phase-pure/single crystalline Li3N-rich SEI constitutes an interphase of high mechanical strength and low Li+ diffusion barrier. We elucidate the correlation among Li+ transference number, diffusion behavior, concentration gradient, and the stability of the lithium metal electrode by integrating phase field simulations with experiments. We demonstrate improved reversibility and charge/discharge cycling behaviors for both symmetric cells and full lithium-metal batteries constructed with this Li3N-rich SEI. These studies may cast new insight into the design and engineering of an ideal artificial SEI for stable and high-performance lithium metal batteries.
25 May 2021 in Carbon Energy
Aqueous electrolytes were once the rule for the battery industry. Until the advent of lithium ion batteries, a majority of commercially relevant batteries utilized water as the solvent for ion exchange. The development of the intercalation‐based lithium ion battery upended the industrial aqueous electrolyte paradigm: the high energy density of the lithium‐ion battery was revolutionary but required the use of organic electrolytes capable of passivating strongly redox active electrodes. With the safety of organic electrolytes becoming an issue in the early 1990s, a small community re‐examined aqueous electrolytes for lithium ion batteries. The first such audacious attempt was by Dahn et al., who conceptualized an aqueous lithium‐ion battery chemistry based on electrode materials suitable for the narrow electrochemical stability window of water, sacrificing energy density and cycle life for safety and low cost. The concept of an aqueous lithium‐ion battery was revived in the mid‐2010s with “highly concentrated” electrolytes, expanding the electrochemical stability window of water to regions comparable with nonaqueous electrolytes. Since then, significant efforts have been made around the world, aiming to understand the nature of the interfacial stability in those high‐concentration electrolytes as well as to further make the system viable for practical batteries. This review summarizes these efforts in this emerging frontier of new battery chemistries.
1 January 2011 in Journal of the Electrochemical Society
An electrolyte additive based on highly fluorinated phosphate ester structure was identified as being able to stabilize carbonate-based electrolytes on <mml:math display="inline"><mml:mrow><mml:mn>5</mml:mn><mml:mspace width="0.3em"></mml:mspace><mml:mi mathvariant="normal">V</mml:mi></mml:mrow></mml:math>5V class cathode surfaces. The synthesis and structural analysis of the additive are described, and preliminary yet encouraging results from electrochemical characterization showed that this additive participates in forming a protective interphasial chemistry not only on transition metal oxide cathode at high voltage ( <mml:math display="inline"><mml:mrow><mml:mo>∼</mml:mo><mml:mn>5</mml:mn><mml:mspace width="0.3em"></mml:mspace><mml:mi mathvariant="normal">V</mml:mi></mml:mrow></mml:math>∼5V vs Li) but also on graphitic graphite at low voltage ( <mml:math display="inline"><mml:mrow><mml:mo>∼</mml:mo><mml:mn>0</mml:mn><mml:mspace width="0.3em"></mml:mspace><mml:mi mathvariant="normal">V</mml:mi></mml:mrow></mml:math>∼0V vs Li), making it possible to formulate an electrolyte supporting reversible <mml:math display="inline"><mml:msup><mml:mi mathvariant="normal">Li</mml:mi><mml:mo>+</mml:mo></mml:msup></mml:math>Li+ -intercalation chemistry in the coveted <mml:math display="inline"><mml:mrow><mml:mn>5</mml:mn><mml:mspace width="0.3em"></mml:mspace><mml:mi mathvariant="normal">V</mml:mi></mml:mrow></mml:math>5V region.