15 August 2002 in Physical Review Letters
We show that carbon nanotube transistors operate as unconventional “Schottky barrier transistors,” in which transistor action occurs primarily by varying the contact resistance rather than the channel conductance. Transistor characteristics are calculated for both idealized and realistic geometries, and scaling behavior is demonstrated. Our results explain a variety of experimental observations, including the quite different effects of doping and adsorbed gases. The electrode geometry is shown to be crucial for good device performance.
26 August 2001 in Nano Letters
3 December 2001 in Physical Review Letters
Ambipolar electrical transport is reported in single-wall carbon nanotube (SWNT) field-effect transistors. In particular, the properties of SWNT junctions to TiC are discussed in detail. The carbide-nanotube junctions are abrupt and robust. In contrast to planar junctions, these contacts present low resistance for the injection of both - and -type carriers—the apparent barrier height of the junction is modified by the gate field. Thus SWNTs offer the novel possibility of ambipolar Ohmic contacts.
15 April 2002 in Applied Physics Letters
Carbon nanotube field-effect transistors (CNTFETs) fabricated out of as-grown nanotubes are unipolar p-type devices. Two methods for their conversion from p- to n-type devices are presented. The first method involves conventional doping with an electron donor, while the second consists of annealing the contacts in vacuum to remove adsorbed oxygen. A comparison of these methods shows fundamental differences in the mechanism of the transformation. The key finding is that the main effect of oxygen adsorption is not to dope the bulk of the tube, but to modify the barriers at the metal–semiconductor contacts. The oxygen concentration and the level of doping of the nanotube are therefore complementary in controlling the CNTFET characteristics. Finally, a method of controlling individually the contact barriers by local heating is demonstrated.
20 May 2002 in Applied Physics Letters
We have fabricated single-wall carbon nanotube field-effect transistors (CNFETs) in a conventional metal–oxide–semiconductor field-effect transistor (MOSFET) structure, with gate electrodes above the conduction channel separated from the channel by a thin dielectric. These top gate devices exhibit excellent electrical characteristics, including steep subthreshold slope and high transconductance, at gate voltages close to 1 V—a significant improvement relative to previously reported CNFETs which used the substrate as a gate and a thicker gate dielectric. Our measured device performance also compares very well to state-of-the-art silicon devices. These results are observed for both p- and n-type devices, and they suggest that CNFETs may be competitive with Si MOSFETs for future nanoelectronic applications.
29 August 2002 in Physical Review Letters
We have investigated the electrical transport properties of carbon nanotube field-effect transistors as a function of channel length, gate dielectric film thickness, and dielectric material. Our experiments show that the bulk properties of the semiconducting carbon nanotubes do not limit the current flow through the metal/nanotube/metal system. Instead, our results can be understood in the framework of gate and source-drain field induced modulation of the nanotube band structure at the source contact. The existence of one-dimensional Schottky barriers at the metal/nanotube interface determines the device performance and results in an unexpected scaling behavior.