Unbalanced operation of distribution systems deteriorates power quality andincreases investment and operation costs. Feeder reconfiguration and phaseswapping are the two main approaches for load balancing, being the formermore difficult to execute due to the reduced number of sectionalizing switchesavailable in most distribution systems. On the other hand, phase swappingconstitutes a direct, effective and low cost alternative for load balancing. The main contribution of this paper is the proposal of an optimization model anda solution technique for phase balancing planning in distribution systems. Asregards the optimization model, a mixed integer nonlinear programming formulationis proposed. On the other hand, the proposed solution techniqueconsists on a specialized genetic algorithm. To show the effectiveness of theproposed approach, several tests are carried out with two distribution systemsof 37 and 19 buses, this last one with different load models. Results showedthat in addition to the achievement of the primary objective of loss reduction,phase balancing allows obtaining other technical benefits such as improvementof voltage profile and alleviation of congested lines.
14 October 2024 in Arabian Journal for Science and Engineering
This paper presents a stochastic mixed-integer linear mathematical model for finding the optimal placement and sizing of distributed generation in a DC distribution network, considering the uncertainty of electrical demand and distributed renewable sources. The proposed model accurately represents the original mixed-integer nonlinear model, obtaining a globally optimal solution in less computational time with low errors. The mathematical model allows for considering constraints related to the maximum limits for the penetration of distributed generation, such as those specified by Resolution CREG 174 of 2021. Furthermore, the uncertainties of the electrical demand, wind energy-based distributed generation (DG), and solar energy-based DG are considered in the mathematical models using a two-stage stochastic programming approach. The accuracy and efficiency of the proposed model were tested and validated on a 21-node DC test system from the specialized literature, and the effectiveness and robustness were assessed on a 69-node DC test system. The obtained results show that the proposed stochastic mixed-integer linear mathematical model performs well.
31 May 2013 in Journal of Control, Automation and Electrical Systems
A methodology is proposed that solves the vehicle routing problem with a private fleet and a common carrier using an iterated local search algorithm, based on two concepts: intensification and diversification. The first concept is implemented by using random variable neighbourhood search, while the second concept applies perturbation schemes. To validate the proposed methodology, systems with up to 50 customers and two to eight vehicles are tested. The results are compared with those presented in the specialized literature, including the quality of response and computation time, reaching in all cases the best solution reported with low computing times. In the second stage and given the previous verification, cases of medium and high mathematical complexity are analysed. These cases consider instances with 50 to 513 customers and 8 to 29 vehicles, and high-quality solutions are reached within reasonable computation times.
Conflicting sustainability dimensions are considered in a multi-objective formulation, focusing on the capacitated location routing problem (CLRP). The proposed sustainable version (S-CLRP) addresses the location of facilities, the routing of vehicles, the balance of the working load among drivers, and the environmental impact of operations due to the emission of greenhouse gases. In this work, both a mixed integer linear programming model solved using the goal attainment method and an approximated method based on iterated local search (ILS) and decomposition (ILS/D) are proposed. The results show the generation of non-dominated fronts with adequate dispersion and convergence characteristics with which supply-chain decision-makers can evaluate the impact of their decisions on the financial, environmental and social dimensions of their operations.