1 May 2009 in Diamond and Related Materials
13 February 2023 in Applied Physics Letters
The realization of electroluminescence (EL) of negatively charged nitrogen vacancy (NV−) centers is important toward all-electrical control of diamond quantum devices. In this study, we demonstrated electrical excitation and detection of EL of single NV− centers by using lateral diamond p+–i(n−)–n+ diodes. It had been grown by homoepitaxy using the plasma enhanced chemical vapor deposition technique. We introduced a lightly phosphorus doped i(n−) layer to stabilize the negative state of NV centers. It was estimated that the efficiency of the electrical excitation rate of the NV center was more than 30 times enhanced by introducing lateral diamond p+–i(n−)–n+ diodes structure compared with the previous vertical diode. Furthermore, the EL of a single NV− center embedded in the i(n−) layer region was characterized. The results show that the charge state of the single NV centers can be manipulated by the voltage applied to the p+–i(n−)–n+ diode, where the emission of EL is increasingly dominated by NV− in the range of 30 to 50 V.
1 November 1991 in Japanese Journal of Applied Physics
The representative figure method, which was proposed to greatly reduce the proximity effect correction time, is studied in detail in this paper. The method is shown to have a high correction accuracy (the error is 0.25% for a 50 kV acceleration voltage and a 2 µm small area) and a high speed correction time (which includes the time for preparing representative rectangles; 1/10 compared with the conventional method). The basic idea of the present method is found to be applicable to data compaction. The compaction ratio by this method is (1/2)-(1/100) of that by the conventional method. The representative figure method has a wide range of applications and has many advantages.
1 May 2004 in Thin Solid Films
1 September 1998 in Japanese Journal of Applied Physics
A new method of fabricating Si microstructures on thin insulating films is described. It combines selective-area growth of Si with electron-beam direct patterning of a SiO2/SiN
x
bilayer mask. The chemical composition of the top SiO2 layer of the mask can be modified locally by electron-beam irradiation. The different chemical properties between irradiated and nonirradiated surfaces make it possible to deposit Si only on the irradiated surface. The bottom SiN
x
layer is stable against electron-beam irradiation, and thus insulates electrically the deposited Si microstructure from the Si substrate. Selective-area growth of Si was performed by ultrahigh-vacuum chemical vapor deposition (UHVCVD).
1 June 1999 in Synthetic Metals