Department of Mechanic Engineering, National Taiwan University of Science and Technology, No. 43, Sec. 4, Keelung Rd., Da’an Dist., Taipei City 106335, Taiwan
Auto-generated profile, based on publicly available information
Jhong-Ren Huang
Department of Mechanic Engineering, National Taiwan University of Science and Technology, No. 43, Sec. 4, Keelung Rd., Da’an Dist., Taipei City 106335, Taiwan
Metastable states near deep eutectic points are typically regarded as transient intermediates preceding phase separation, yet their potential chemical reactivity remains largely unexplored. Here, we demonstrate that metastable Au-Si bonding configurations derived from Au4Si near its deep eutectic temperature exhibit molecule-like reactivity associated with an sp3-like local bonding environment, enabling direct Si-C bond formation at temperatures as low as 636 K. Using a high-vacuum coevaporation platform, Au-Si species generated during coevaporation react with carbon clusters to produce SiC accompanied by Au segregation, whereas elemental Si under identical conditions remains chemically inert. Raman spectroscopy and X-ray photoelectron spectroscopy reveal that SiC formation occurs only within a narrow temperature window centered at the eutectic point and displays nonmonotonic temperature dependence inconsistent with conventional catalytic or vapor-liquid-solid mechanisms. These results provide experimental evidence that eutectic metastable bonding configurations can transiently adopt molecule-like characteristics, thereby enabling unconventional low-temperature reaction pathways in metal-semiconductor systems.
26 August 2022 in Archives of Metallurgy and Materials
In this work, nanosized Ni (nNi) powders of 50 nm are mixed with Cr and Ni submicron-powders (600 nm) to fabricate Cr-50 mass% Ni alloys by vacuum hot pressing. In order to evaluate the influence of the nanosized Ni powders, different amounts of nanosized Ni powders are added to produce the Cr-(50-x) mass% Ni-x mass% nNi alloys (x = 0, 10, 20 , and 30). The hot pressing was maintained at 1275°C, 48 MPa for 1 h. The microstructure evaluation, mechanical, and electrical properties were performed. The results reveal that mechanical and electrical properties are enhanced when increasing the nNi addition. The Cr-20 mass% Ni-30 mass% nNi presents the highest relative density of 96.53% and the electrical conductivity of 2.18×104 Scm–1, moreover, the hardness and transverse rupture strength values increase to 76.1 HRA and 1217 MPa, respectively. Moreover, a more homogeneous microstructure and a decrease in the mean grain size to 3.15 μm are acquired. Significantly, this fabrication procedure (adding 30 mass% nanosized nickel powders) results in the optimal microstructure, electrical and mechanical properties of submicron-structured Cr-(50-x) mass% Ni-x mass% nNi alloys.