1 October 2007 in Construction and Building Materials
1 August 2006 in Engineering Geology
1 January 1999 in The Analyst
The usefulness of photoacoustic techniques in characterizing the thermal properties of kaolinite clays, which are a very abundant mineral in some regions of Brazil, was investigated. Different behavioural patterns are observed below and above a heating temperature of 950 °C and can be attributed to the change from metakaolinite to an amorphous three-dimensional mineral which crystallises to mullite and crystobalite above 1200 °C. The implications of the results in the manufacture of clay bricks are briefly considered. This is important in tropical regions where a knowledge of the thermal properties of materials used in the building construction industry is highly desirable.
1 June 2020 in Transportation Geotechnics
CMCássia Maria de Assis Rangel Melo
Cássia Maria de Assis Rangel Melo
1 January 2017 in Ocean Engineering
MAMárcio de Souza Soares de Almeida
Márcio de Souza Soares de Almeida
30 June 2012 in Materiales de Construcción
Over the past few decades, hundreds of papers have been published on the benefits of including rock powder as a raw material in fired clay brick manufacture. Very little has been written, however, about the durability and long-term behaviour of the final product. As a rule, the ceramic bricks used in construction in developing countries are fired at low temperatures, which detracts from their mechanical performance. This is particularly visible in harsh environmental conditions, where weathering causes severe deterioration. The present paper describes the impact of weathering on clay bricks containing from 0 to 10% granite powder, an industrial by-product. The specimens were fired at 500, 700 or 900 ºC and subsequently exposed to natural environmental conditions or accelerated laboratory weathering. Their physical and mechanical properties were evaluated to determine the effect of the composition of raw materials on fired clay product durability.