25 October 2018 in IEEE Transactions on Cybernetics
In this paper, the robust formation control problem is investigated for a group of quadrotors. Each quadrotor dynamics exhibits the features of underactuation, high nonlinearities and couplings, and disturbances in both the translational and rotational motions. A distributed robust controller is developed, which consists of a position controller to govern the translational motion for the desired formation and an attitude controller to control the rotational motion of each quadrotor. Theoretical analysis and simulation studies of a formation of multiple uncertain quadrotors are presented to validate the effectiveness of the proposed formation control scheme.
1 October 2019 in IEEE Transactions on Control Systems Technology
This brief presents a robust formation control method for a team of quadrotors with communication delays. The dynamics of each quadrotor is subject to nonlinearities, parametric perturbations, and external disturbances. A distributed formation controller is developed for the quadrotor team, which consists of a position controller to achieve the desired formation trajectories and patterns, and an attitude controller to regulate the attitude angles for each quadrotor. It is proven that the tracking errors can converge into a neighborhood of the origin bounded by a given constant in a finite time. Experimental results on multiple microquadrotors are provided to verify the effectiveness of the proposed control method.
18 July 2022 in IEEE Robotics and Automation Letters
Gait phase-based control is a trending research topic for walking-aid robots, especially robotic lower-limb prostheses. Gait phase estimation is a challenge for gait phase-based control. Previous researches used the integration or the differential of the human's thigh angle to estimate the gait phase, but accumulative measurement errors and noises can affect the estimation results. In this letter, a more robust gait phase estimation method is proposed using a unified form of piecewise monotonic gait phase-thigh angle models for various locomotion modes. The gait phase is estimated from only the thigh angle, which is a stable variable and avoids phase drifting. A Kalman filter-based smoother is designed to further suppress the mutations of the estimated gait phase. Based on the proposed gait phase estimation method, a gait phase-based joint angle tracking controller is designed for a transfemoral prosthesis. The proposed gait estimation method, the gait phase smoother, and the controller are evaluated through offline analysis on walking data in various locomotion modes. And the real-time performance of the gait phase-based controller is validated in an experiment on the transfemoral prosthesis.
13 June 2022 in IEEE Robotics and Automation Letters
Researchers are currently making progress in unifying the entire gait cycle of powered prostheses by using a human-inspired phase variable, but constructing a robust phase variable to more accurately estimate the gait phase and desired joint trajectories of prostheses during varying walking speeds remains an open problem. Firstly, this study proposed a piecewise monotonic and smooth phase variable to predict the gait phase from only the measured thigh angle. Compared to the two most widely used methods, thigh angle integral vs. thigh angle and thigh angular rate vs. thigh angle, the proposed method addressed the drift problem of the integral-based method and the noise problem of the angular rate-based. Then a predictive tuning-free model that represents gait kinematics as a continuous function of proposed phase variable and walking speed was constructed to generate desired joint virtual constraints for speed-adaptation control of powered knee-ankle prosthesis during continuously varying walking speeds. Experiments were conducted with six able-bodied participants wearing inertial measurement units and performing periodic and non-periodic (quick start and stop) tasks, and one transfemoral amputee wearing a powered knee-ankle prosthesis walking on a treadmill. Experimental results illustrated that the root mean squared error of the gait phase estimated by the proposed approach was 75% lower than the integral-based and angular rate-based methods, and the proposed approach performed well in the continuous phase control of a powered knee-ankle prosthesis during varying walking speeds.
15 May 2020 in IEEE Transactions on Vehicular Technology
This paper focuses on designing a robust time-varying formation controller for a set of micro quad-copters with switching interaction communication topology. Each micro quad-copter within the formation is represented by an under-actuated nonlinear model with the dynamics of each quad-copter being subjected to parameter perturbations and external disturbances. A robust formation control protocol is proposed that consists of a position controller and an attitude controller. The theoretical analysis is detailed to prove robust stability and tracking performance of the multi-vehicle control system, subject to uncertainties and switching interaction communication topology. Experimental and simulation results for a set of micro quad-copters validate the advantages of the proposed control protocol in time-varying formation flights.
29 March 2022 in IEEE Transactions on Neural Systems and Rehabilitation Engineering
Leg stiffness is considered a prevalent parameter used in data analysis of leg locomotion during different gaits, such as walking, running, and hopping. Quantification of the change in support leg stiffness during stair ascent and descent will enhance our understanding of complex stair climbing gait dynamics. The purpose of this study is to investigate a methodology to estimate leg stiffness during stair climbing and subdivide the stair climbing gait cycle. Leg stiffness was determined as the ratio of changes in ground reaction force in the direction of the support leg ${F}_{l}$ (leg force) to the respective changes in length ${L}_{l}$ during the entire stance phase. Eight subjects ascended and descended an instrumented staircase at different cadences. In this study, the changes of leg force and length (force–length curve) are described as the leg stiffness curve, the slope of which represents the normalized stiffness during stair climbing. The stair ascent and descent gait cycles were subdivided based on the negative and positive work fluctuations of the center-of-mass (CoM) work rate curve and the characteristics of leg stiffness. We found that the leg stiffness curve consists of several segments in which the force–length relationship was similarly linear and the stiffness value was relatively constant; the phase divided by the leg stiffness curve corresponds to the phase divided by the CoM work rate curve. The results of this study may guide biomimetic control strategies for a wearable lower-extremity robot for the entire stance phase during stair climbing.