Tribology Research Institute State Key Laboratory of Rail Transit Vehicle System School of Mechanical Engineering Southwest Jiaotong University Chengdu 610031 P. R. China
Auto-generated profile, based on publicly available information
Hujun Wang
Tribology Research Institute State Key Laboratory of Rail Transit Vehicle System School of Mechanical Engineering Southwest Jiaotong University Chengdu 610031 P. R. China
Superhydrophobic surfaces have great potential for application in self-cleaning and oil/water separation. However, the large-scale practical applications of superhydrophobic coating surfaces are impeded by many factors, such as complicated fabrication processes, the use of fluorinated reagents and noxious organic solvents and poor mechanical stability. Herein, we describe the successful preparation of a fluorine-free multifunctional coating without noxious organic solvents that was brushed, dipped or sprayed onto glass slides and stainless-steel meshes as substrates. The obtained multifunctional superhydrophobic and superoleophilic surfaces (MSHOs) demonstrated self-cleaning abilities even when contaminated with or immersed in oil. The superhydrophobic surfaces were robust and maintained their water repellency after being scratched with a knife or abraded with sandpaper for 50 cycles. In addition, stainless-steel meshes sprayed with the coating quickly separated various oil/water mixtures with a high separation efficiency (>93%). Furthermore, the coated mesh maintained a high separation efficiency above 95% over 20 cycles of separation. This simple and effective strategy will inspire the large-scale fabrication of multifunctional surfaces for practical applications in self-cleaning and oil/water separation.
16 July 2019 in ACS Applied Materials & Interfaces
The anti‐friction function of superwetting surfaces with superhydrophobicity has been demonstrated. However, the influence regularity of wettability to tribological performance, and the underlying mechanism are still unclear. Here, two kinds of microstructured surfaces with different wettability are fabricated on the substrate of steel by controlling surface chemical compositions. The water contact angles on these surfaces range from 0° to 151°. The ball‐plate tribological tests are performed under water lubrication. The results show that the tribological performance is closely related to surface wettability. The friction coefficient increases with the increase of contact angles when the surfaces are hydrophilic rather than superhydrophilic. In contrast, the friction coefficient on the hydrophobic surfaces decreases with the increase of contact angles. Furthermore, the best anti‐friction capability is obtained on the superhydrophobic surfaces, and the anti‐friction mechanism is elucidated. The lowest friction coefficient was 0.12 under the load of 10 N. This work provides strong evidence of an association between tribological property and wettability, which may inspire the fabrication and application of special wetting surfaces in friction control.