10 August 2017 in IEEE Transactions on Vehicular Technology
A unified error analysis of multi-antenna systems with orthogonal space-time block coding (OSTBC) using transmit antenna selection (TAS) over Nakagami-m channels in the presence of feedback delay and channel estimation error is presented, where the number of transmit antennas is arbitrarily selected. For imperfect channel state information (CSI), the Nakagami-m channel is modeled as the sum of Nakagami-m̂ channel and independent Gaussian channel error. By this model, accurate and closed-form approximate bit error rate (BER) expressions of TAS-OSTBC for M-ary quadrature amplitude modulation and M-ary phase-shift keying are derived by using the moment generating function of received SNR. With the approximate BER formula, the number of antennas to be selected for transmission can be adapted by minimizing the BER of the system with imperfect CSI. The diversity and coding gains of TAS-OSTBC with K receive antennas and M antennas selected from N transmit antennas for transmission are analyzed at high SNR. For noninteger mK, the upper and lower bounds of the diversity gain for different CSI and estimation error scenarios are derived. But for integer mK, the results indicate that the upper and lower bounds are equal achieving the full diversity order of mKN for perfect CSI, zero diversity order and partial diversity order of mMK for estimation error variance being fixed and being a decreasing function of average SNR, respectively. The coding gain is affected by M, N, K, Nakagami parameter m, code rate, modulation, and channel correlation coefficients. Simulation results verify the validity of the theoretical analysis and effectiveness of the adaptive antenna selection scheme.
15 November 2022 in IEEE Transactions on Mobile Computing
In this article, energy efficiency (EE) is maximized for the reconfigurable intelligent surface (RIS) aided millimeter-Wave (mmWave) networks with non-orthogonal multiple access (NOMA) and multiple mobile devices. To this end, we first propose the EE optimization, under the constraints of maximum power, minimal rate of devices and constant modulus of beamforming (BF) vectors. Then, the joint resource allocation scheme of power allocation (PA) and BF is designed. Specifically, given PA, an effective iterative algorithm based on the majorization-minimization, concave-convex procedure and block coordinate descent (BCD) is presented to obtain closed-form solutions of suboptimal passive BF (PBF) and analog BF (ABF) for each iteration. Then, given PBF and ABF, an effective iterative algorithm based on the successive convex approximation, BCD and Dinkelbach methods is derived to achieve suboptimal closed-form PA for each iteration. By incorporating these two algorithms into the BCD method, a joint optimization algorithm for EE maximization is presented. As a result, joint resource allocation of PA, PBF and ABF is attained. Besides, the convergence and complexity of the algorithms are analyzed. For comparison, the benchmark scheme based on the multidimensional search method and artificial bee colony algorithm is also presented. Simulation results show that the proposed joint scheme is effective and higher EE can be obtained with lower complexity.
26 July 2019 in IEEE Transactions on Vehicular Technology
This paper presents three energy-efficient power allocation (PA) schemes for the downlink of a distributed multiple-input multiple-output (D-MIMO) system with beamforming at distributed antenna ports and antenna selection (AS) at a mobile station over composite Rayleigh channels. Subject to maximum power constraints, a constrained maximization problem on energy efficiency (EE) is formulated. Based on theoretical analysis, the optimal beamforming is shown to be aligned with the channel direction that renders the joint design problem to be a PA optimization one. It is shown that the optimization problem is strictly pseudo-concave with a unique maximum. Thus, an optimal PA scheme based on a gradient projection method is proposed to obtain the global solution. To speed up the gradient projection method, a closed-form initialization is derived. Furthermore, a low-complexity optimal PA schemes based on the Karush-Kuhn-Tucker conditions is proposed. This optimal scheme has a closed-form PA expression for a certain condition or else computes the PA by the Lambert function or the bisection method, and gives the same EE performance as that of the optimal gradient-based scheme. The performances of these two optimal schemes are optimal and verified to be valid in contrast to the inaccurate optimal scheme in the literature. For large maximum power, the closed-form initial PA will become the optimal solution and can be considered as a suboptimal solution with no iterative computation. Making use of the tight upper and lower bounds of the Lambert function, a very low-complexity suboptimal PA scheme is developed. Simulation results show that the proposed suboptimal scheme can achieve nearly optimal performance. Maximum EE and maximum channel power, which are optimal and suboptimal criteria, are adopted for antenna selection. The simple suboptimal criterion can provide EE performance very close to that of the optimal one. The D-MIMO with AS is shown to give considerable EE gain over the single receive antenna system. Moreover, the proposed three PA schemes can be used for multiuser diversity D-MIMO systems to achieve superior EE performance.
2 May 2022 in IEEE Internet of Things Journal
This article investigates energy efficiency (EE) maximization for an Internet of Things-based (IoT) distributed antenna system (DAS) with imperfect channel state information (CSI) subject to maximum transmit power and minimum data rate constraints. First, we derive achievable rates and corresponding EE expressions of the system for single and multiple IoT devices. Then, we formulate the EE maximization problem in the single-device IoT-DAS with imperfect CSI, and it has a special form of the difference of concave functions. To solve this problem, we develop a near-optimal power allocation (PA) scheme by using the concave–convex procedure (CCCP) and block coordinate descent (BCD) method. It can achieve an EE performance similar to that of the optimal exhaustive search scheme, but with lower complexity. Based on this result, we present a suboptimal PA scheme with a single-layer iteration to decrease the complexity and maintain a performance similar to that of the near-optimal scheme. Using the results above, the EE optimization for IoT-DAS with imperfect CSI for multiple devices is addressed. A near-optimal PA scheme based on the fractional programming (FP) theory as well as the CCCP and BCD methods for solving the optimization problem is presented. Also, a suboptimal PA scheme based on the FP theory and BCD method is developed to further decrease the complexity. Interestingly, these two schemes have the same performance for perfect CSI. Simulation results show the validity of the developed schemes and their superior performances over existing methods.
13 July 2020 in IEEE Transactions on Communications
In this paper, the error performance and spectrum efficiency (SE) of uplink massive multiuser spatial modulation (SM) MIMO systems with zero-forcing detection for perfect and imperfect channel state information (CSI) are investigated over composite Rayleigh fading channels. We firstly derive the error probabilities of transmit antenna index detection and transmitted symbol detection of each user. Using these results, the bit error rate (BER) performance of the system under perfect CSI is analyzed. Furthermore, a closed-form average BER of the system is derived. We generalize the analytical results of perfect CSI to those of imperfect CSI for practicality, and derive a closed-form BER for the system with imperfect CSI. Based on this, two asymptotic BER expressions are developed to characterize the error performance of the system for large-scale receive antennas and high SNR. By means of the asymptotic expressions, the diversity order of the system is attained. Besides, we derive a lower bound on the achievable SE of the system with imperfect CSI. With this lower bound, an approximate expression of the achievable SE is obtained in closed form. Simulation results indicate that our theoretical analysis is valid, and agrees with simulation results well.
7 March 2018 in IET Communications
The energy‐efficient power allocation (PA) of distributed antenna system using multiple receive antennas is studied over spatially correlated Rayleigh channels. A new energy efficiency (EE) defined as the ratio of the average transmission rate to the consumed total power is presented. According to this definition, subject to the maximum power constraint, an optimal PA scheme is developed by maximising the EE. It is shown that the solution of PA in the constrained EE optimisation does exist and is unique. A Newton method with iterative algorithm is proposed to attain the PA. To avoid iterative calculation of the optimal scheme, a suboptimal PA scheme is derived by means of the Lambert function. As a result, closed‐form PA is obtained. The developed schemes only need the statistical channel information and large scale information, and thus they have lower overhead and better robustness. Moreover, they may include the ones over spatially independent channel as special cases. The theoretical EE is further derived for performance evaluation, and the resultant closed‐form expression is obtained. Computer simulation indicates that the theoretical EE agrees well the simulation result, and the suboptimal PA scheme can achieve the EE value near to the optimal one with lower complexity.