A novel graphite-phase carbon nitride (g-C3N4)/bismuth ferrite (BiFeO3)/carbon nanotubes (CNTs) ternary magnetic composite (CNBT) was prepared by a hydrothermal synthesis. Using this material, Cr(VI) and methylene blue (MB) were removed from wastewater through synergistic adsorption and photocatalysis. The effects of pH, time, and pollutant concentration on the photocatalytic performance of CNBT, as well as possible interactions between Cr(VI) and MB species were analyzed. The obtained results showed that CNTs could effectively reduce the recombination rate of electron-hole pairs during the photocatalytic reaction of the g-C3N4/BiFeO3 composite, thereby improving its photocatalytic performance, while the presence of MB increased the reduction rate of Cr(VI). After 5 h of the simultaneous adsorption and photocatalysis by CNBT, the removal rates of Cr(VI) and MB were 93% and 98%, respectively. This study provides a new theoretical basis and technical guidance for the combined application of photocatalysis and adsorption in the treatment of wastewaters containing mixed pollutants.
Cr(VI) contamination has posed great threat to both the ecosystem and human health for its carcinogenic and mutagenic nature. A highly effective adsorbent for the removal of Cr(VI) was prepared and its adsorption mechanism was thoroughly discussed in this study. In detail, magnetic BiFeO3 and kenaf biochar were loaded on cross-linked chitosan to obtain chitosan-kenaf biochar@BiFeO3 (CKB) for improving adsorption capacity towards Cr(VI). The adsorption process of Cr(VI) onto CKB was evaluated as a function of the pH, the existence of competing ions, the initial concentration of Cr(VI) and contact time. The results show that CKB exhibits the highest adsorption capacity under the optimal pH 2.0. The presence of competing ions such as Ca2+, NO3−, SO42−, and Cl− decreases the adsorption capacity; among them, Ca2+ and NO3− show the greatest hindrance. By studying the effect of initial Cr(VI) concentration on the adsorption capacity, it was found that CKB in the solution was enough to remove Cr(VI) for all treatments (10–200 mg/L). The adsorption experimental data were well fitted with pseudo-first-order model, suggesting that chemisorption is not the dominant rate-limiting step. Freundlich isotherm model can better explain the adsorption process, indicating a non-ideal adsorption towards Cr(VI) on a heterogeneous surface of CKB. A 25-1 Fractional Factorial Design (FFD) showed that pH and initial concentration of Cr(VI) have significant influence on Cr(VI) adsorption in our reaction system. In general, excellent adsorption efficiency of CKB indicates that it may be a good candidate for the remediation of Cr(VI)-contaminating wastewater.
In conventional oxidation technologies for treatment of contaminated waters, secondary pollution of the aqueous environment often occurs because of the additional oxidants generated during the process. To avoid this problem, Fe/NG catalyst composites without additives were developed in this study for decontamination of methylene blue (MB) from waters. The Fe/NG catalyst, composed of carbon nitride and iron chloride (FeCl3·6H2O), was prepared by high temperature pyrolysis. It is an exceptionally efficient, recoverable, and sustainable catalyst for degradation of organic matter. The morphological characteristics, chemical structure, and surface properties of the catalyst composites were investigated. The catalyst exhibited high MB removal efficiency (100%) within 30 min under ambient temperature and dark conditions. The experiments indicated that an MB degradation effect was also applicable under most acid–base conditions (pH = 2–10). The characterization results using electron spin resonance and analysis of intermediate products demonstrated that free radicals such as ·OH and ·O2− were produced from the Fe/NG composites in the heterogeneous system, which resulted in the high MB degradation efficiency. Moreover, the catalysis reaction generated reducing substances, triggering iron carbon micro-electrolysis to spontaneously develop a microcurrent, which assisted the degradation of MB. This study demonstrates the feasibility of Fe/NG catalysts that spontaneously generate active species for degrading pollutants in an aqueous environment at normal temperature, providing an attractive approach for treating organic-contaminated waters.