A 2D/3D switchable autostereoscopic display based on a polymer-stabilized blue-phase liquid crystal (PSBPLC) lens is proposed. The operating principle of the PSBPLC lens is analyzed. We have designed a 2-view 2D/3D switchable autostereoscopic display equipped with a PSBPLC lens on a liquid crystal display panel. The 2D/3D switching lens is polarization-independent and performs fast switching because of the employment of the PSBPLC. Experiment results show that the proposed 2D/3D switchable autostereoscopic display achieves good 2D and 3D performance.
18 March 2021 in IEEE Transactions on Instrumentation and Measurement
The micro/nano hardness profile has been extensively used in manufacturing to understand material properties from external surfaces to internal material. The microhardness profile requires the indentation dimension and depth measurements. Dimension measurement in most cases is interfered by noise, texture or defects, while depth identification asks for accurate stitching of local micrographs and recognition of tilted machined surfaces. However, few commercial microhardness testers can address the issues, while manual measurement is limited by low robustness and efficiency. To fill this gap, this paper proposes an automatic and accurate measurement method of microhardness profile based on image processing. The method can stitch local micrographs, recognise indentation dimensions and depths, generate the micro-hardness profile, and analyze the material property with only one click. Experiments proved the method enjoys high accuracy, automation, and robustness.
15 October 2013 in Applied Mechanics and Materials
Based on the establishment of the geometry and equations of non-contact vortex gripper, the numerical analysis of the internal flow field characteristics and the key parameters affecting the adsorption performance was carried out. The results showed that: for the single air-entrance gripper, the negative pressure center not coincides at the geometric center of the gripper. Besides, with the movement of swirling flow, the position of the negative pressure center transformed; When the geometric parameters and working conditions are fixed, there is the most suitable air gap making the maximum value of negative pressure and adsorption force; Compared to single air-entrance gripper, double air-entrance gripper have better adsorption stability.