The time-of-flight (TOF) of ultrasonic flow meters is usually determined by the zero-crossing point extracted from the echo, but the zero-crossing point is not necessarily the starting point of the echo, and the time interval (called interval 2) between them is often ignored. This will result in significant measurement deviation in short distances or when the frequency of the transmitted signal is low. Therefore, this paper proposes a new method for calculating the short-distance ultrasonic TOF based on double-interval. The time interval (called interval 1) for continuous signal transmission is considered at the transmitting end, and the interval 2 is considered at the receiving end. It is also validated that the optimal double intervals remain constant under the specific excitation signal of the transmitting transducer, and the TOF is corrected accordingly. The method proposed in this paper has significantly improved the flow velocity measurement performance compared to the traditional double-threshold (DT) and the method based on intermittent non-coding excitation, with a simulated flow measurement accuracy of 99.974%. Moreover, this paper also improves traditional Kalman filtering for better data preprocessing.
We propose the estimation technique for the underwater acoustic channel using the hard thresholding pursuit (HTP) and the Newton-step-based hard thresholding pursuit (NSHTP) algorithms. The proposed methods can be effectively applied in pilot aided channel estimation of the orthogonal chirp division multiplexing (OCDM) system, which is a new multi-carrier scheme for robust underwater acoustic (UWA) communication. In these methods, the appropriate candidate is selected in each iteration to construct the support, then the gradient method of the Newton-like method is used to calculate the channel impulse response (CIR). Results of the simulation channel and a measured UWA channel prove that HTP and NSHTP algorithms provide good performance. 1