23 December 2010 in Lab on a Chip
The deformability of red blood cells (RBCs) is an important property that allows the cells to squeeze through small capillary vessels and can be used as an indicator for disease. We present a microfluidic based technique to quantify the deformability of RBCs by stretching a collection of RBCs on a timescale of tens of microseconds in a microfluidic chamber. This confinement constrains the motion of the cell to the imaging plane of the microscope during a transient cavitation bubble event generated with a focused and pulsed laser. We record and analyze the shape recovery of the cells with a high-speed camera and obtain a power law in time, consistent with other dynamic rheological results of RBCs. The extracted exponents are used to characterize the elastic properties of the cells. We obtain statistically significant differences of the exponents between populations of untreated RBCs and RBCs treated with two different reagents: neuraminidase reduces the cell rigidity, while wheat germ agglutinin stiffens the cell confirming previous experiments. This cavitation based technique is a candidate for high-throughput screening of elastic cell properties because many cells can be probed simultaneously in situ, thus with no pre-treatment.
25 June 2014 in Scientific Reports
Single transient laser-induced microbubbles have been used in microfluidic chips for fast actuation of the liquid (pumping and mixing), to interact with biological materials (selective cell destruction, membrane permeabilization and rheology) and more recenty for medical diagnosis. However, the expected heating following the collapse of a microbubble (maximum radius ~ 10-35 µm) has not been measured due to insufficient temporal resolution. Here, we extend the limits of non-invasive fluorescence thermometry using high speed video recording at up to 90,000 frames per second to measure the evolution of the spatial temperature profile imaged with a fluorescence microscope. We found that the temperature rises are moderate (< 12.8°C), localized (< 15 µm) and short lived (< 1.3 ms). However, there are significant differences between experiments done in a microfluidic gap and a container unbounded at the top, which are explained by jetting and bubble migration. The results allow to safe-guard some of the current applications involving laser pulses and photothermal bubbles interacting with biological material in different liquid environments.
31 May 2018 in Physical Review E
In this study a single laser pulse spatially shaped into a ring is focused into a thin water layer, creating an annular cavitation bubble and cylindrical shock waves: an outer shock that diverges away from the excitation laser ring and an inner shock that focuses towards the center. A few nanoseconds after the converging shock reaches the focus and diverges away from the center, a single bubble nucleates at the center. The inner diverging shock then reaches the surface of the annular laser-induced bubble and reflects at the boundary, initiating nucleation of a tertiary bubble cloud. In the present experiments, we have performed time-resolved imaging of shock propagation and bubble wall motion. Our experimental observations of single-bubble cavitation and collapse and appearance of ring-shaped bubble clouds are consistent with our numerical simulations that solve a one-dimensional Euler equation in cylindrical coordinates. The numerical results agree qualitatively with the experimental observations of the appearance and growth of large bubble clouds at the smallest laser excitation rings. Our technique of shock-driven bubble cavitation opens interesting perspectives for the investigation of shock-induced single-bubble or multibubble cavitation phenomena in thin liquids.
23 September 2013 in Journal of Fluid Mechanics
Laser-induced optical breakdown at two spatial locations in ultrapure water saturated with ambient gas is used to nucleate microscopic bubble clouds with lifetimes of tens of nanoseconds. The liquid is ruptured via the interaction of a pair of laser-induced shocks and bubbles. We find that the acoustically nucleated micro-bubbles appear in a localized region defined by the plane that bisects the pair of foci, where rarefaction waves (reflected from the laser-induced bubbles) merge. We measure the probability for acoustic nucleation as a function of the separation between the foci, and the minimum pressures for each separation are calculated with Euler flow simulations. The simulations show that the liquid is exposed to negative pressures for 3–17 ns. A statistical threshold pressure for cavitation inception (0.5 probability) of $- 20. 1\pm 3. 4~\mathrm{MPa} $ is extracted from the measured probabilities and the calculated minimum pressures.
13 March 2017 in Scientific Reports
In this contribution, we report on the implementation of a novel noise-enabled optical ratchet system. We demonstrate that, unlike commonly-used ratchet schemes—where complex asymmetric optical potentials are needed—efficient transport of microparticles across a one-dimensional optical lattice can be produced by introducing controllable noise in the system. This work might open interesting routes towards the development of new technologies aimed at enhancing the efficiency of transport occurring at the micro- and nanoscale, from novel particle-sorting tools to efficient molecular motors.
13 May 2014 in Optics Express
Optics InfoBase is the Optical Society's online library for flagship journals, partnered and copublished journals, and recent proceedings from OSA conferences.