31 May 2018 in Physical Review E
In this study a single laser pulse spatially shaped into a ring is focused into a thin water layer, creating an annular cavitation bubble and cylindrical shock waves: an outer shock that diverges away from the excitation laser ring and an inner shock that focuses towards the center. A few nanoseconds after the converging shock reaches the focus and diverges away from the center, a single bubble nucleates at the center. The inner diverging shock then reaches the surface of the annular laser-induced bubble and reflects at the boundary, initiating nucleation of a tertiary bubble cloud. In the present experiments, we have performed time-resolved imaging of shock propagation and bubble wall motion. Our experimental observations of single-bubble cavitation and collapse and appearance of ring-shaped bubble clouds are consistent with our numerical simulations that solve a one-dimensional Euler equation in cylindrical coordinates. The numerical results agree qualitatively with the experimental observations of the appearance and growth of large bubble clouds at the smallest laser excitation rings. Our technique of shock-driven bubble cavitation opens interesting perspectives for the investigation of shock-induced single-bubble or multibubble cavitation phenomena in thin liquids.
1 November 2022 in Physics of Fluids
Two pairs of converging and superimposing shock and Rayleigh waves are generated on a glass substrate by focusing laser pulses on two concentric rings in a bullseye configuration (67 and 96 μm radii). We experimentally study the threshold for the substrate damage as a function of the number of repetitions and the delay (0–20 ns). The bullseye focusing experiments are compared to a single focusing ring. Additionally, fluid–structure interaction simulations using a volume-of-fluid framework are utilized to estimate the stresses. The lowest number of repetitions to attain surface damage is found for constructive superposition of the Rayleigh waves, i.e., here for a delay of 10 ns. The observed damage is consistent with the simulations where the largest positive stresses ( GPa) are achieved for bullseye focusing with ns followed by ns, which corresponds to a simultaneous shock wave focusing. In all these cases, the positive stresses are followed (a few nanoseconds later) by the negative stresses that can reach GPa.
13 January 2021 in Journal of Fluid Mechanics
In this work we propose and demonstrate a Fresnel-lens-inspired method to focus multiple laser-induced shock waves through time-delay superposition at arbitrary locations. While the principle works for any geometry, we demonstrate that this method already achieves focusing with two pairs of photoacoustic shock wave emitters located on a line centred around the acoustic axis ( ns, respectively. We find that the location of constructive superposition is significantly closer to the origin than what would be expected for linear waves in homogeneous media. This is confirmed with simulations using an Euler solver that shows the importance of finite-amplitude effects. The simulated dynamics are in reasonable agreement with our measurements. Finally, pressure gains at various locations along the acoustic axis are tested with the response of gaseous microbubbles acting as pressure probes. The measurements agree with calculated pressure ratios at different positions.
26 March 2026 in Journal of Colloid and Interface Science
We posit that the adsorption kinetics of surfactants critically influence cavity dynamics during the rapid formation of interfaces on submillisecond timescales. We propose that standard surfactants such as sodium dodecylsulfate (SDS), while significantly reducing surface tension at equilibrium, do not significantly alter cavity dynamics. In contrast, ultrafast surfactants such as Surfynol, with adsorption rates that match or exceed the rate of new interface formation, would allow for the formation of deeper cavities that last longer. We conducted experiments using a submillimeter jet impacting a liquid pool much larger than the jet dimensions, containing surfactant that create transient cavities which retract and close within milliseconds. Two surfactants with distinct adsorption kinetics were compared: sodium dodecylsulfate (SDS) and Surfynol 465. The induced dynamics, retraction and closure of the cavity, due to their characteristic submillisecond times, have been captured using ultrafast photography. Our experiments reveal the difference between the effects of sodium dodecylsulfate (SDS), a surfactant with moderately fast adsorption kinetics, and Surfynol 465, a surfactant with ultrafast adsorption kinetics. For SDS, the collapse pathway is nearly indistinguishable from that of pure water, suggesting negligible dynamic surface tension reduction. In contrast, Surfynol allows the emergence of deeper cavities that persist longer in the liquid pool. To quantify these effects, we applied a harmonic oscillator model that describes cavity retraction in the deep seal regime. The model fits the experimental data well, and the extracted damping values correlate with the expected dynamic surface tensions.
21 November 2025 in Advanced Healthcare Materials
The defined vascularization of complex and intricate tissue constructs remains an unmet need in tissue engineering and regenerative medicine. While large constructs require vasculature for oxygen, nutrient supply, and waste clearance, their incorporation within biofabricated tissues is essential for developmental and disease modeling studies. There is, therefore, a critical demand to establish reproducible and organized vascular networks within in vitro models to ensure experimental robustness and quantitative interpretability. Current micropatterning and biofabrication strategies are limited in emulating native geometrical complexity, throughput, and resolution, while self‐assembly approaches rely on inherently random network formation. Here, laser‐induced forward transfer (LIFT) is utilized, offering high spatial resolution for deterministic micropatterning of cells with high viability. A unique droplet quality assessment framework is established through a multiparametric study to objectively identify a printability window, assigning a single‐indexed score per printing condition. Within the optimal transfer regime, control over droplet concentration is demonstrated. The impact of pattern density on early vascular morphogenesis is explored, highlighting the effect of geometrical design on network formation. Finally, these findings are leveraged for the spatially controlled assembly of multicellular vascular patterns, offering a reproducible strategy for high‐resolution micropatterning and addressing a key limitation in the biofabrication of physiologically relevant tissue models.
29 September 2023 in Journal of Fluid Mechanics
The maximum size and lifetime of an acoustically nucleated cavitation bubble is inversely proportional to the driving frequency and has achieved a limit of approximately 10 MHz. Smaller cavitation bubbles that are critical to microscopic applications require shorter lifetimes that correspond to higher oscillation frequencies. Here, we demonstrate that acoustic cavitation in the 100 MHz range and beyond can be achieved through wave propagation in a solid rather than in a liquid. The cavitation bubble is nucleated at a nano-sized fracture on a glass substrate, and its expansion is driven by a leaky Rayleigh wave, while the inertial collapse is induced by a trailing shock wave. As both waves travel at different velocities, the time interval between these two events is a function of the distance to the source. In this way, we demonstrate experimentally control of the lifetime of the bubbles in a range between 6 and 80 ns, corresponding to oscillation frequencies between 13 and 166 MHz. Our results agree with finite-volume fluid–structure interaction simulations.