The load modulated balanced amplifier (LMBA) technique uses a control signal, injected at the output coupler, to modulate the impedance of the balanced amplifier transistors. A 14.1-W X-band LMBA is reported, integrating for the first time the balanced, driver, and control signal amplifiers in a single microwave monolithic integrated circuit. Load modulation and bias settings are used to demonstrate that high circuit efficiency can be achieved as the LMBA is adjusted for operation in three RF-power regimes; 1.5, 5.6, and 14.1 W for a constant input power of 22 dBm. Power-added efficiencies above 37% are observed in all power regimes from 8 to 9 GHz under saturated conditions.
9 May 2016 in IEEE Microwave and Wireless Components Letters
This letter presents wide bandwidth and high efficiency hybrid balanced and push-pull amplifier circuit topologies using Gallium Nitride (GaN) transistors and Liquid Crystal Polymer (LCP) multilayer circuit techniques. Push-pull circuit configurations allow differential and common mode impedances to be presented at even and odd harmonics independently, enabling the continuous mode (class BJ) design space to be exploited. Push-pull amplifiers display drain efficiencies $>$ 40%, output power $>$ 5 W over a bandwidth of 3.5 to 8.5 GHz at 2 dB compression levels, and under CW conditions. By comparison, although designed with identical performance goals, a conventional quadrature balanced amplifier performance is below that of the push-pull configuration.