21 August 2020 in Nature Communications
Metallic lithium is a promising anode to increase the energy density of rechargeable lithium batteries. Despite extensive efforts, detrimental reactivity of lithium metal with electrolytes and uncontrolled dendrite growth remain challenging interconnected issues hindering highly reversible Li-metal batteries. Herein, we report a rationally designed amide-based electrolyte based on the desired interface products. This amide electrolyte achieves a high average Coulombic efficiency during cycling, resulting in an outstanding capacity retention with a 3.5 mAh cm−2 high-mass-loaded LiNi0.8Co0.1Mn0.1O2 cathode. The interface reactions with the amide electrolyte lead to the predicted solid electrolyte interface species, having favorable properties such as high ionic conductivity and high stability. Operando monitoring the lithium spatial distribution reveals that the highly reversible behavior is related to denser deposition as well as top-down stripping, which decreases the formation of porous deposits and inactive lithium, providing new insights for the development of interface chemistries for metal batteries.
1 June 2018 in Nature Communications
Electrical mobility demands an increase of battery energy density beyond current lithium-ion technology. A crucial bottleneck is the development of safe and reversible lithium-metal anodes, which is challenged by short circuits caused by lithium-metal dendrites and a short cycle life owing to the reactivity with electrolytes. The evolution of the lithium-metal-film morphology is relatively poorly understood because it is difficult to monitor lithium, in particular during battery operation. Here we employ operando neutron depth profiling as a noninvasive and versatile technique, complementary to microscopic techniques, providing the spatial distribution/density of lithium during plating and stripping. The evolution of the lithium-metal-density-profile is shown to depend on the current density, electrolyte composition and cycling history, and allows monitoring the amount and distribution of inactive lithium over cycling. A small amount of reversible lithium uptake in the copper current collector during plating and stripping is revealed, providing insights towards improved lithium-metal anodes.
1 August 2020 in Energy Storage Materials
26 October 2016 in Advanced Energy Materials
23 May 2019 in Chemistry of Materials
The development of safe and high performance Li-metal anodes is crucial to meet the demanded increase in energy density of batteries. However, severe reactivity of Li-metal with typical electrolytes and dendrite formation leads to a poor cycle life and safety concerns. Therefore, it is essential to develop electrolytes that passivate the reactivity towards Li-metal and supress dendrite formation. Carbonate electrolytes display severe reactivity towards Li-metal, however, they are preferred above the more volatile ether-based electrolytes. Here a carbonate electrolyte gel polymer approach is combined with LiNO3 as an additive to stabilize Li-metal plating. This electrolyte design strategy is systematically monitored by operando neutron depth profiling (NDP) to follow the evolution of the plated Li-metal density as well as the inactive lithium in the SEI during cycling. Individually, the application of the LiNO3 electrolyte additive and the gel polymer approach are shown to be effective. Moreover, when used in conjunction the effects are complementary in increasing the plated Li-density, reducing inactive Li-species and reducing the overpotentials. The LiNO3 additive leads to more compact plating, however it results in a significant buildup of inactive Li species in a double layer SEI structure, which challenges the cell performance over longer cycling. In contrast the gel polymer strongly suppresses the buildup of inactive Li species by immobilizing of the carbonate electrolyte species, however, the plating is less dense and occurs with a significant overpotential. Combining the LiNO3 additive with the gel polymer approach results in a thin and homogeneous SEI with a high conductivity through the presence of Li3N and a limited buildup of inactive Li-species over cycling. Through this approach even high plating capacities, reaching of 7 mAh/cm2, can be maintained at a high efficiency. The rational design strategy, empowered by monitoring the Li-density evolution, demonstrates the possibilities of achieving stable operation of Li metal in carbonate-based electrolytes.
3 July 2018 in Frontiers in Energy Research
Neutron Depth Profiling (NDP) allows determination of the spatial distribution of specific isotopes, via neutron capture reactions. In a capture reaction charged particles with fixed kinetic energy are formed, where their energy loss through the material of interest can be used to provide the depth of the original isotope. As lithium-6 has a relatively large probability for such a capture reaction, it can be used by battery scientists to study the lithium concentration in the electrodes even during battery operation. The selective measurement of the 6Li isotope makes it a direct and sensitive technique, whereas the penetrative character of the neutrons allows practical battery pouch cells to be studied. Using NDP lithium diffusion and reaction rates can be studied operando as a function of depth, opening a large range of opportunities including the study of alloying reactions, metal plating, and (de) intercalation in insertion hosts. In the study of high rate cycling of intercalation materials the relatively low Li density challenges counting statistics while the limited change in electrode density due to the Li-ion insertion and extraction allows straightforward determination of the Li density as a function of electrode depth. If an electrode can be (dis)charged reversibly, data can be acquired and accumulated over multiple cycles to increase the time resolution. For Li metal plating and alloying reactions, the large lithium density allows good time resolution, however the large change of the electrode composition and density makes extracting the Li-density as a function of depth more challenging. Here an effective method is presented, using calibration measurements of the individual components, based on which the ratio of the components as a function of depth can be determined as well as the total Li-density. The same principles can be applied to insertion host materials, where the differences in density due to electrolyte infiltration yield the electrode porosity as a function of depth. This is of particular importance for battery electrodes where porosity has a direct influence on the energy density and charge transport.