Metal–organic frameworks (MOFs) and their derivatives are considered as promising catalysts for the oxygen reduction reaction (ORR) and oxygen evolution reaction (OER), which are important for many energy provision technologies, such as electrolyzers, fuel cells and some types of advanced batteries. In this work, a “strain modulation” approach has been applied through the use of surface‐mounted NiFe‐MOFs in order to design an advanced bifunctional ORR/OER electrocatalyst. The material exhibits an excellent OER activity in alkaline media, reaching an industrially relevant current density of 200 mA cm−2 at an overpotential of only ≈210 mV. It demonstrates operational long‐term stability even at a high current density of 500 mA cm−2 and exhibits the so far narrowest “overpotential window” ΔEORR‐OER of 0.69 V in 0.1 m KOH with a mass loading being two orders of magnitude lower than that of benchmark electrocatalysts.
Flexible metal-organic frameworks (MOFs) are structurally flexible, porous, crystalline solids that show a structural transition in response to a stimulus. If MOF-based solid-state and microelectronic devices are to be capable of leveraging such structural flexibility, then the integration of MOF thin films into a device configuration is crucial. Here we report the targeted and precise anchoring of Cu-based alkylether-functionalised layered-pillared MOF crystallites onto substrates via stepwise liquid-phase epitaxy. The structural transformation during methanol sorption is monitored by in-situ grazing incidence X-ray diffraction. Interestingly, spatially-controlled anchoring of the flexible MOFs on the surface induces a distinct structural responsiveness which is different from the bulk powder and can be systematically controlled by varying the crystallite characteristics, for instance dimensions and orientation. This fundamental understanding of thin-film flexibility is of paramount importance for the rational design of MOF-based devices utilising the structural flexibility in specific applications such as selective sensors.
The quest for developing materials that provide a perfect trade‐off between factors such as enzyme‐like response, stability, and low cost has been a long‐standing challenge in the field of biosensing. Metal‐organic frameworks (MOFs) and their composites have emerged as promising candidates for biosensing applications due to their exceptional properties such as tunable pore size, high specific surface area, and exposed active sites. A comparative study of the intrinsic peroxidase‐like activity of five different MOF materials: Fe‐BTC, NH2‐MIL‐101(Fe), composites of Fe‐BTC with polymers polydopamine (PDA), poly p‐phenylenediamine (PpPDA), and poly(3,4‐ethylenedioxythiophene) is reported for the detection of H2O2, an important biomarker in biomedical diagnostics. The response of these materials toward H2O2 via electrochemical and colorimetric techniques is mapped and it is found that, at neutral pH, the Fe‐BTC/PEDOT composite exhibits the highest sensitivity and activity compared to other MOF materials in this study. The results indicate that the combination of unique properties of Fe‐BTC and conducting polymer PEDOT, improves the peroxidase‐like activity of the Fe‐BTC/PEDOT composite compared to the individual components. This work presents a new opportunity for easy‐to synthesize and low‐cost MOFs/conducting polymer composites for biosensing applications and provides significant insights to achieve rational design of composites with desirable functional properties