In this study, removal of arsenazo(ΙΙΙ) using activated carbon (AC) and multiwalled carbon nanotubes and of methyl red using AC from waste water is reported. The influences of pH, temperature, concentration of the dye, amount of adsorbents, particle size of adsorbent, and contact time on the efficiency of removal from aqueous solution are investigated. Adsorption experiments indicate that the extent of adsorption is strongly dependent on the pH of the solution. Changes in free energy of adsorption ( ), enthalpy ( ), and entropy ( ) are calculated to understand the nature of adsorption. The calculated values of indicate that the adsorption process is spontaneous. The estimated values of and are positive which indicates that the adsorption process is endothermic and that the dye molecules are organized on the adsorbent surface in a more random fashion than in solution. The dye adsorption process follows a pseudo-second-order model under involvement of an intra-particle diffusion mechanism. Standard adsorption isotherms are used to fit the experimental data.
Partial least squares (PLS1) and principal component regression (PCR) are two multivariate calibration methods that allow simultaneous determination of several analytes in spite of their overlapping spectra. In this research, a spectrophotometric method using PLS1 is proposed for the simultaneous determination of ascorbic acid (AA), dopamine (DA) and uric acid (UA). The linear concentration ranges for AA, DA and UA were 1.76–47.55, 0.57–22.76 and 1.68–28.58 (in μgmL−1), respectively. However, PLS1 and PCR were applied to design calibration set based on absorption spectra in the 250–320nm range for 36 different mixtures of AA, DA and UA, in all cases, the PLS1 calibration method showed more quantitative prediction ability than PCR method. Cross validation method was used to select the optimum number of principal components (NPC). The NPC for AA, DA and UA was found to be 4 by PLS1 and 5, 12, 8 by PCR. Prediction error sum of squares (PRESS) of AA, DA and UA were 1.2461, 1.1144, 2.3104 for PLS1 and 11.0563, 1.3819, 4.0956 for PCR, respectively. Satisfactory results were achieved for the simultaneous determination of AA, DA and UA in some real samples such as human urine, serum and pharmaceutical formulations
21 February 2013 in Environmental Monitoring and Assessment