19 October 2020 in Powder Metallurgy
The mechanisms of densification in spark plasma sintering (SPS) were investigated both analytically and numerically for a model system of two spherical metallic powder particles. From the microscopic temperature distribution, the possibility of a micro-local overheating of the particle–particle contacts was analysed for different particle sizes, contact geometries, materials, and electrical loads. It is shown that, for particles below the size of one millimetre, local overheating is below one Kelvin. Subsequently, the material transport by thermomigration, electromigration, and diffusion driven by surface curvature and external pressure was derived from microscopic field distributions obtained from analytical calculations and finite-element simulations. The results show that, while the mechanical pressure accelerates material transport by orders of magnitude, the electrical current and the temperature gradients do not. It is also shown that pulsing the current has no significant influence on the densification rate.
30 October 2020 in Powder Metallurgy
The mechanisms of densification during spark plasma sintering (SPS) of spherical copper particles are investigated both experimentally and analytically. Experimentally measured densification rates are compared to expected contributions to densification coming from Coble creep, Nabarro-Herring creep, power-law creep, and pressure-assisted sintering described by the two-particle model. The results indicate densification by Coble creep or a low-temperature version of power-law creep in the investigated range of temperature and pressure at a relative density of 70%. The findings are supported by (i) activation energies obtained for various conditions using the Dorn-method as well as (ii) the pressure dependence of the densification rate.
19 June 2012 in Journal of Materials Science
22 March 2021 in Computational Mechanics
In the present research, a numerical modeling approach of the initial stage of consolidation during spark plasma sintering on the microscopic scale is presented. The solution of a fully coupled thermo-electro-mechanical problem also accounting for grain boundary and surface diffusion is found by using a staggered way. The finite-element method is applied for solving the thermo-electro-mechanical problem while the finite-difference method is applied for the diffusion problem. A Lagrange-based non-linear formulation is used to deal with the detailed description of plastic and creep strain accumulation. The numerical model is developed for simulating the structural evolution of the involved particles during sintering of powder compacts taking into account both the free surface diffusion of the particles and the grain boundary diffusion at interparticle contact areas. The numerical results obtained by using the two-particle model—as a representative volume element of the powder—are compared with experimental results for the densification of a copper powder compact. The numerical and experimental results are in excellent agreement.
23 August 2023 in Advanced Engineering Materials
Multivariant experimental investigations and multiphysics microstructural modeling of the spark plasma sintering process of metallic powders have been performed up to a relative density of approximately 80%. In comparison, the effect of sintering temperature, pressure, and particle size on the interparticle contact area growth and axial shrinkage of cylindrical specimens of copper and nickel particles is measured in laboratory scaled tests. Herein, for the first time all relevant for sintering phenomena are considered simultaneously: the fully coupled thermo‐electro‐mechanical modeling of the spark plasma sintering processes, additionally taking into account for lattice, grain boundary, surface diffusion, electromigration, and thermomigration, has been carried out. The computational analysis of various physical phenomena allows to identify dominant and insignificant mechanisms. The two‐level numerical simulation includes the modeling of the sintering setup at the macroscopic level and the neck formation process in particle chain systems at the microscopic level. The results of the numerical simulations show a very good agreement with the experimental data. Therefore, the impact of electrical and mechanical loads as well as of particle size on microscopic distribution of temperature, inelastic strain, and on densification has been studied by the finite element simulations.
12 January 2010 in Materials Science Forum
Sintering especially of loose particle packings is accompanied by dimensional changes of the specimen. The growth of inter particle contacts under the influence of the Laplace pressure is well understood and described by the two particle model. On the other hand the understanding of other fundamental sintering phenomena i.e. cooperative material transport processes is rather vague. To overcome this limitation for near net-shape production of components by powder metallurgy an improved model of particle rearrangement processes is required. First efforts to obtain necessary experimental data were performed at 1D and 2D models. But recent improvements of high resolution synchrotron computer tomography (SCT) setups allow the acquisition of in-situ data of particle rearrangements. In-situ studies of particle rotations during sintering were conducted at the ESRF in Grenoble. The rotations during free sintering of monocrystalline particles were investigated during continuous heating up to 1050 °C or with frequent interruptions of the heating by 1 hr dwell times every 100 °C. In contrast to 1D specimens measured by Wieters the 3D specimens showed negligible rotations. This must be attributed to the constraints in 3D samples. To obtain a more detailed insight in the rotations the particles of one sample were marked. It is possible to show that the particles perform intrinsic rotations. Therefore a new rotation model is developed. The intrinsic rotations are confirmed by complementary EBSD analyses as well.