Zhiying Mo

Zhiying Mo

Auto-generated profile, based on publicly available information

Zhiying Mo

Collaborative Innovation Center of Steel Technology, University of Science and Technology Beijing, Beijing 100083, China

Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
15 April 2022 in Metals
Verified
Journal Article
Open access
PDF file
ZMZhiying Mo
Zhiying Mo
Zhendong WangZhendong Wang
Zhendong Wang
RWRudong Wang
Rudong Wang
ZZZhengzhi Zhao
Zhengzhi Zhao
YFYuan Fang
Yuan Fang
HCHeng Cui
Heng Cui
Tinplate is widely used in food packaging and chemical packaging. Industrial production continues to reduce the thickness of tinplate steel, which puts higher requirements on the control of inclusions. In this study, compared with traditional detection methods, the Ultrasonic Detection method can analyze the distribution of nonmetallic inclusions in larger size samples, which is closer to the actual production process. The numerical simulation model is established to analyze the flow, heat transfer and solidification behavior of molten steel. The results show: There are two nonmetallic inclusion bands in the sample at the edge of the slab, one is the inner and outer arc side of the sample, and the other is the 1/8 to 1/4 slab thickness region of the inner arc side in the sample. The inclusions in the thickness direction of the slab edge within the range of 1/8 to 1/4 are captured in areas 800 mm to 1400 mm below the meniscus. The solidification of the inner and outer arcs is not symmetrical, which leads to the asymmetrical distribution of inclusions in the inner and outer arcs. This study can provide a reference for improving the tinplate production process.

27 December 2019 in Metals
Verified
Journal Article
Open access
PDF file
BNBeijia Ning
Beijia Ning
ZZZhengzhi Zhao
Zhengzhi Zhao
ZMZhiying Mo
Zhiying Mo
HWHong Wu
Hong Wu
CPChong Peng
Chong Peng
HGHonggen Gong
Honggen Gong
To study the influences of continuous annealing temperature on microstructure, mechanical properties and textures of battery shell steel, continuous annealing experiments were conducted at 710 °C, 730 °C, 760 °C and 780 °C respectively. The mechanical properties and normal anisotropy index (r) were measured by tensile test and the textures were investigated using the method of electron backscatter diffraction (EBSD). The results show that as annealing temperature rose, the grain size, fracture elongation and r value increased, whereas the strength and yield ratio decreased. The yield strength was 122 MPa, the tensile strength was 286 MPa, meanwhile the elongation and r value arrived at 38.8% and 2.3 when the annealing temperature rose to 780 °C. After annealing, the main texture in battery shell steel is {111} , followed by {111} . With the increase of annealing temperature, textures in {001} crystallographic plane weakened while textures in {111} plane strengthened, which is beneficial to the deep drawability of the steel.