1 January 2022 in Journal of Energy Storage
20 March 2023 in Journal of Power Sources
29 June 2022 in IEEE Sensors Journal
Due to the high magnetic flux density at the edge of the magnet, the narrow-magnet Electromagnetic Acoustic Transducer can excite the ultrasonic wave with a larger amplitude than the conventional EMAT, but the waveform of the former is distorted. This paper presents a new focused EMAT design with a narrow magnet, which can both enhance the ultrasonic A0-Lamb signal and correct the distorted waveform. A synthesis equation of the ultrasonic signals based on the contribution of the in-plane (IP) and out-of-plane (OP) components of the magnet field is proposed to analyze the mechanism of the waveform distortion. The distorted wave is corrected by an uneven split-wires arrangement strategy. The EMAT employs a sector-shaped narrow magnet and a set of focused meander-line coils containing uneven split wires, for generating a 1MHz focused A0-Lamb wave in an aluminum plate. A three-dimensional finite element model of the EMAT is established using COMSOL Multiphysics to perform numerical simulations, and the effectiveness of the EMAT design is verified. The experimental results show that the EMAT not only corrects the signal distortion due to the narrow magnet and suppresses its side lobes, but also enlarges the amplitude of the A0-Lamb wave by 55.6% under the same magnetic flux density when compared with conventional EMAT.
1 March 2022 in Journal of the Electrochemical Society
Lithium-ion battery (LIB) has become an essential part of various advanced energy storage products due to their excellent performance, but the research on battery degradation is always challenging. The technology of using ultrasound to characterise the state of LIBs has unique advantages compared with other non-destructive testing methods. However, there have only been a few studies on the analysis of battery cycle performance through acoustic response results. In this paper, from the perspective of electrochemical-acoustic field coupling, the ultrasonic count is introduced to characterise the battery state. The acoustic response characteristics of the LIB in the cycling are analysed combined with the conventional acoustic metrics. Based on the continuous fatigue damage model, the acoustic count can infer partial change evolution of the overall effective Young’s modulus of the battery. This study shows that the characterisation of the battery state can provide further thinking for the mechanical evolution of the batteries.
15 March 2024 in Journal of the Electrochemical Society
Fast charging technology provides a solution to the issue of charging time for power supplies with long life requirements. However, it will shorten the charging period while also hastening the power battery’s capacity degradation, reducing its service life. The ultrasonic inspection technique has been widely used for the internal structure detection and reaction process characterisation of lithium-ion batteries because of its nondestructive testing properties. This paper presents a method for monitoring the capacity attenuation of a fast-charging battery by calculating the ultrasonic attenuation coefficient α. The experimental findings indicate that the battery’s capacity is more vulnerable to lithium plating during high-rate charging. The parameter α can be employed to illustrate the energy dissipation characteristics of sound as it propagates through the electrode. Moreover, the inhomogeneous ageing of battery electrode material is observed and quantified based on the differences in acoustic signals, which provides new insights into battery health management and uneven ageing assessment.