28 July 2023 in IEEE Transactions on Reliability
When evaluating the reliability of a complex system, epistemic uncertainty exists due to the lack of data and knowledge. The control system's feedback compensation mechanism propagates the uncertainty throughout the system. In addition, the real-time performance compensation causes the system to exhibit implicit degradation, which brings new challenges to reliability evaluation. This article proposes a method to solve the problems of complex feedback control system epistemic uncertainty propagation and reliability evaluation. The arithmetic Liu process is used to model the uncertain performance degradation process of the components in the feedback control system. The feedback behavior of the system and the propagation of uncertainty are described by the uncertain degradation state space model. The Laplace transform is then used to deduce the reliability expression of the system. Afterward, the epistemic uncertainty of the components is transmitted to the uncertainty of the system output. Taking the wind turbine pitch control system as a case, the proposed reliability evaluation method is compared with the method based on probability theory. When there is a lack of degradation data, the results suggest that the proposed strategy is more conservative.
5 April 2025 in Reliability Engineering & System Safety
1 February 2022 in Journal of Systems Engineering and Electronics
Recently, the physics-of-failure (PoF) method has been more and more popular in engineering to understand the failure mechanisms (FMs) of products. However, due to the lack of system modeling methods and problem-solving algorithms, the information of FMs cannot be used to evaluate system reliability. This paper presents a system reliability evaluation method with failure mechanism tree (FMT) considering physical dependency (PDEP) such as competition, trigger, acceleration, inhibition, damage accumulation, and parameter combination. And the binary decision diagram (BDD) analytical algorithm is developed to establish a system reliability model. The operation rules of ite operators for generating BDD are discussed. The flow chart of system reliability evaluation method based on FMT and BDD is proposed. The proposed method is applied in the case of an electronic controller drive unit. Results show that the method is effective to evaluate system reliability from the perspective of FM.
29 March 2024 in Journal of the Franklin Institute
1 August 2023 in Journal of Systems Engineering and Electronics
Degradation and overstress failures occur in many electronic systems in which the operation load and environmental conditions are complex. The dependency of them called dependent competing failure process (DCFP), has been widely studied. Electronic system may experience mutual effects of degradation and shocks, they are considered to be interdependent. Both the degradation and the shock processes will decrease the limit of system and cause cumulative effect. Finally, the competition of hard and soft failure will cause the system failure. Based on the failure mechanism accumulation theory, this paper constructs the shock-degradation acceleration and the threshold descent model, and a system reliability model established by using these two models. The mutually DCFP effect of electronic system interaction has been decomposed into physical correlation of failure, including acceleration, accumulation and competition. As a case, a reliability of electronic system in aeronautical system has been analyzed with the proposed method. The method proposed is based on failure physical evaluation, and could provide important reference for quantitative evaluation and design improvement of the newly designed system in case of data deficiency.
3 September 2025 in IEEE Transactions on Reliability
The reliability of complex electronic systems is paramount due to their widespread application and critical functions. The existence of uncertainty and dependency increases the difficulty of reliability analysis. Current research cannot effectively solve this problem. This article proposes a reliability modeling analysis and uncertainty quantification method for electronic systems with multireliability dependency. The structure-related reliability, the overload-related reliability, and the performance reliability are utilized to evaluate the multidimensional capacities of an electronic system. The degradation-aware model and arithmetic Liu process are employed for uncertainty model construction of the structure-related reliability, while the uncertain random renewal reward process is utilized for uncertainty modeling of the overload-related reliability. Performance reliability is influenced by them, and it is modeled with margin-based reliable principle. The dependencies among the three reliabilities are categorized as O-S (overload-structure) dependency, S-O (structure-overload) dependency, and S/O-P (structure/overload-performance) dependency to analyze the effect of the multireliability dependency on the reliability analysis result. Accordingly, the comprehensive reliability analysis algorithm is developed. Finally, the proposed method is implemented to the numerical case of the microcontroller unit as a specific illustration, demonstrating its effectiveness and rationality.