1 March 2022 in REM - International Engineering Journal
13 May 2025 in Journal of Hazardous Materials
6 April 2023 in Technology audit and production reserves
Currently, there is a tendency to use less silica rich ores given the depletion of high-quality resources. The raw kaolin treatment of Tamazert (Eastern Algeria) produces, by hydrocyclone process, approximately 80 % of siliceous by-products. These siliceous wastes, which are stored in the open air, constitute a significant environmental problem. This research work aims to improve the quality of siliceous by-products, more particularly, to a process for the elimination of iron oxides and aluminum to make this raw material usable industrially as well as solving environmental issues. The collected by-products, were characterized by different techniques, such as X-ray fluorescence (XRF) and X-ray diffraction (XRD). XRF confirmed that the by-products east siliceous, with content going up to 82 % of SiO2. The by-product resulted from the raw kaolin treatment, mainly contains varying amounts of impurities such as iron oxide, titanium oxide and alumina. In all cases, the presence of these impurities affects the color and the physical properties of the mineral, and so lowers the economic value and limits the industrial application. In this framework, the classified fraction (–500)–(+100) µm was directed to attrition scrubbing followed by magnetic separation technique and chemical treatment by sulphuric acid with different concentrations. The results of the beneficiation tests of by-product indicate that using the attrition scrubbing alone not provides a suitable product for glass manufacture. The magnetic separation was tested with attrition on the useful fraction ((–500)–(+100) μm). The non-magnetic attritional fraction concentrates less than 0.45 % of Al2O3 and 0.05 % of Fe2O3. This low content coupled with a remarkable percentage in silica of 97.98 %.The tests by attrition and leaching with 40 % of sulphuric acid show, on the one hand, significant results with a high percentage of silica (>98.5 %) against 0.04 % Fe2O3 and 0.66 % Al2O3 ,and on the other hand, that the enriched product meets the standards required by glass making.
27 July 2023 in Technology audit and production reserves
In recent years, the world has been witnessing serious ecological imbalances due to the catastrophic situation and the damage caused to the environment. Human activities as waste disposal, cement units, smelting, chemical industries etc., are the main causes of pollution. Air pollution directly affects the human living standards, pollutants requires regular control in view of their direct impact on health, such as nitrogen oxide, sulfur dioxide, ozone, and particulate matter. Algeria adopts international standards to monitor the levels of pollution recorded in Algerian cities and compare them with global levels. Thus, the object of this study was the air quality index (AQI) in Annaba (Northeastern of Algeria). This study aimed to evaluate AQI in Annaba. In this context, quantitative estimates of polluted waste resulting from some industrial activities have been conducted in order to determine the degree of its danger and the extent of its contribution to the deterioration of the air quality. The monitoring of pollutants allowed to identify the benefits of comprehensive environmental assessment. The air quality index was determined using various pollutants parameters (dust, ozone, nitrogen dioxide and sulfur dioxide). A ten-point scale ranking of the overall air quality index of pollution accepted in Algeria allows making the differentiated assessment of negative impacts of existing industrial agglomerations on the environment. However, the analysis performed on samples DC1 and DC2 with SEM (TESCAN model VEGA II) and BSE detector (Backscattered Electrons) shows that the particles sizes are estimated to range from hundreds of microns to a few microns, a different morphology and irregular shape. Our results will enable policy makers to appropriate measures to be taken, and which are based mainly on sensitizing economic operators to environmental issues in order to adopt an environmentally friendly industrial system.