30 July 2015 in Journal of Adhesion Science and Technology
Adhesive bond strength of solid wood plays a key role in the efficient use of wood in a large number of engineering applications. In this study, the effects of amount of adhesive, pressing pressure, and pressing time on bonding strength of beech wood bonded with polyvinyl acetate adhesive were investigated and predicted by developing an artificial neural network (ANN) model. Experimental results have showed that bonding strength of wood samples increased generally by increasing amount of adhesive, pressing pressure, and pressing time. Besides, ANN analysis has yielded highly satisfactory results. The designed neural network model allows predicting the bonding strength of wood samples with mean absolute percentage error of 2.454% and correlation coefficient of 97.8% for testing phase. It is clear from the results that the model has a good learning and generalization ability. This model therefore can be used to predict bonding strength of beech samples bonded with polyvinyl acetate adhesive under given conditions. Consequently, this study provides beneficial insights for practitioners in terms of the safe and efficient use of wood as an engineering material in applications related to the strength of the bond between wood and adhesive.
17 September 2022 in Ormancılık Araştırma Dergisi
Mobilya, genel bir ifade ile insanların günlük yaşamdaki ihtiyaçlarını dikkate alarak yaşadıkları ortamları donattıkları veya dekore ettikleri taşınabilir eşyalardır. Mobilya sanayisi yarattığı katma değer ile ülkemiz ekonomisi açısından önemli sektörlerinden birisi olmuştur. Ancak, fiyat ve miktar açısından hammadde temininde karşı karşıya kalınan dalgalanmalar sektörü olumsuz olarak etkileyebilmektedir. Bu durum, günümüz pandemi koşullarında daha da ön plana çıkmış olup sektör üzerinde etkisini hissettirmiştir. Bu çalışma kapsamında, mobilya üretiminde hammadde ile ilgili olarak karşı karşıya kalınan tedarik sorunları değerlendirilmiş ve mobilya üretim sürecinin ana girdilerinden birisi olan MDF/HDF’nin 2001-2020 yıllarına ait üretim, ithalat ve ihracat verileri FAO (Birleşmiş Milletler Gıda ve Tarım Teşkilatı) resmi web sitesinden alınmış ve analiz edilmiştir. Analizlerde basit doğrusal regresyon yöntemi ile modeller oluşturulmuş ve anlamlı regresyon modelleri kullanılarak tahminler ve projeksiyonlar yapılmıştır. Çalışma sonucunda, ithalat verileri kullanılarak oluşturulan modelin istatistiksel olarak anlamsız olduğu görülmüş, öte yandan üretim ve ihracat verileri için kurulan anlamlı modeller kullanılarak tahminler gerçekleştirilmiştir. 2030 yılı dikkate alınarak yapılan projeksiyonlar sonucunda MDF/HDF’nin üretim ve ihracat değerlerinde kayda değer bir artış olacağı öngörülmektedir.
13 March 2025 in European Journal of Wood and Wood Products
Density is one of the major decision-making criteria of medium-density fiberboard (MDF) in terms of product quality. It is therefore very important to keep this key quality characteristic of the MDF in control. This research presents an industrial implementation of Shewhart’ $$\:\stackrel{-}{\text{x}}-\text{s}$$ control charts, which are generally constructed to catch large shifts, and exponentially weighted moving average (EWMA) control chart, which is mostly used to uncover small and moderately shifts, to monitor the density in the MDF manufacture in a forest products enterprise. Besides, a process capability analysis (PCA) was used to evaluate whether or not the measured outputs of density fall inside the specification limits. As a result; it was detected that the process was not in control for both $$\:\stackrel{-}{\text{x}}-\text{s}$$ and EWMA, which demonstrate the changes in the density. The PCA also revealed that the process did not have sufficient capability in meeting the specifications of the density. Ultimately, such studies will allow both engineers and quality control officers to monitor a large number of measurements of quality characteristics in manufacturing processes. This can make a major contribution to detecting whether quality-related issues exist in processes and thus guide practitioners in improving or maintaining the quality level. Furthermore, in light of the current study, the efforts to be carried out to identify and eliminate factors that cause the process to deviate from specifications as well as factors that cause signal generation are expected to contribute to both reducing the amount of non-conforming products and achieving a more stable process.
30 September 2025 in Turkish Journal of Forestry | Türkiye Ormancılık Dergisi
This study deals with forecasting of Türkiye's industrial wood production and makes a projection for future five years. The data used within the scope of the study were provided from the statistics published by the General Directorate of Forestry, and in this regard, annual data covering the years 2000-2023 were used. The forecasting of industrial wood production was performed via the linear, exponential growth, quadratic and s-curve trend analysis functions. The mean absolute percentage error (MAPE) and the coefficient of determination (R2) were considered as the main performance evaluation criteria to compare the forecast success of the methods. Among the analysis methods considered, it was seen that the linear method yielded the highest MAPE with a value of 9.9238%, while the quadratic model yielded the lowest MAPE with a value of 6.2096%. Similarly, the linear model gave the lowest R2 with a value of 0.9098, while the quadratic model gave the highest R2 with a value of 0.9402. In summary, although the outcomes of all methods were satisfactory, it has been understood that the best outcomes in terms of performance criteria in forecasting of industrial wood production for the current data set were provided via the quadratic method.
30 June 2025 in Düzce Üniversitesi Orman Fakültesi Ormancılık Dergisi
In today's globalizing world, economic cooperation is of great importance for countries to develop their trade networks. It is possible to consider the OECD as one of such collaborations. The main purpose of this study is to subject the export and import values of OECD countries in terms of plywood, veneered panel and similar laminated wood product group to hierarchical cluster analysis and to classify the countries according to their similarities. The plywood, veneered panel and similar laminated wood export and import data belonging to the years 2013-2023 of the countries subject to the study were provided from Trademap website. The results of the hierarchical cluster analysis indicated that it is possible to divide OECD countries into minimum 2 groups and maximum 4 groups in terms of export, and minimum 2 groups and maximum 5 groups in terms of import. Moreover, hierarchical cluster analysis revealed Türkiye's position among the OECD countries. It has been understood that Türkiye is in the cluster with the highest number of countries, in all clustering options in terms of both the export and import. This result demonstrated that Türkiye is similar to a large number of the OECD countries in terms of foreign trade of the relevant product group. It is possible to state that such studies may be important in terms of both seeing the current situation of the countries and making more effective assessments regarding the products or sectors under research.
15 October 2025 in Artvin Çoruh Üniversitesi Orman Fakültesi Dergisi
Monitoring production processes with statistical process control charts can provide useful information about the process. This application aims to reveal whether the production process is in control in terms of the data of the bursting strength through exponentially weighted moving average (EWMA) and individual-moving range (I-MR) control charts. Both EWMA chart and I-MR charts were created using the bursting strength data provided from an enterprise for a certain period of time. Within the scope of the study, a total of 126 data belonging to the bursting strength were used to create the control charts. In the creating of the EWMA chart, the weighting factor (λ) was chosen as 0.2. The results of all univariate process monitoring tools considered within the scope of the study showed that the production process was out of control in terms of the bursting strength. In other words, EWMA and I-MR charts were able to effectively detect the variations for the data set belonging to the quality variable under study. It was seen that the charts can be applied to the production process as effective signal detection and process control or monitoring tools in terms of the quality variable of interest.