11 April 2023 in IEEE Sensors Journal
Before using the strap-down inertial navigation system (SINS)/ celestial navigation system (CNS) integrated navigation system, the calibration of its error parameters is a necessary process to improve the system accuracy. In this paper, an all-parameter system-level calibration method has been proposed, which utilizes Kalman filtering for simultaneously estimating the bias, scale factor, misalignments of inertial measurement unit (IMU), and installation errors of the star sensor. The observation has been constructed using the inertial navigation output information and the starlight vector measured by the star sensor. The observability of the error parameters has been analyzed theoretically, and the optimal excitation conditions for each error parameter are obtained. The effects of the angle between the starlight vector and the optical axis of the star sensor, and the attitude of the IMU, on the estimation accuracy of the installation error of the star sensor are also given. Finally, a 10-order rotation scheme has been designed and all the error parameters can be optimally excited. The simulation and experimental results demonstrate that all the error parameters have better stability and repeatability, when compared with the traditional method, and the initial alignment error of 3.4" is better than 13.1" of the traditional method. Moreover, the installation error of the star sensor can be estimated with a high precision only when the angle between the starlight vector and the optical axis of the star sensor exceeds 1°. It is shown that the proposed method can effectively improve the navigation performance of the SINS/CNS integrated navigation system.
22 July 2024 in IEEE Transactions on Instrumentation and Measurement
Land-vehicle gravimetry has shown great promise for its use in dynamic gravimetry, with the advantages of achieving higher spatial resolution and yielding more high-frequency gravity information compared with airborne and marine gravimetry. However, it is typically constrained by complicated environments. To eliminate the impact of periodic attitude changes caused by such environments and investigate the means for the autonomous determination of the deflection of the vertical (DOV) based on the refinement of the local gravity field, the attitude judgment wave-number correlation filtering (AJWCF) algorithm and the modified path gravity anomaly compensation (MPGAC) method were proposed, and their use was verified. First, the main sources of error of the stable platform and strapdown gravimeters were analyzed, and discretization of the Vening Meinesz integral was conducted on the spherical surface. Then, the AJWCF algorithm was proposed based on analysis of the characteristics of the state motion, and the MPGAC method was proposed to conveniently acquire the regional gravity anomaly, including additional high-frequency information. Finally, multiple land-vehicle gravimetry tests were carried out to evaluate the feasibility and performance of the proposed algorithm. The experiments indicated that repeated lines verified levels of repeatability based on the AJWCF algorithm as good as 1.03 mGal, and the root mean square error (RMSE) was reduced from 3.15 to 1.94 mGal, with 1.25 km spatial resolution. Moreover, the calculated accuracy for the DOV based on the MPGAC method was improved to within 1ʺ. Theoretical analysis and practical tests confirmed that the proposed algorithms were feasible for use in land-vehicle gravimetry.
11 December 2025 in IEEE Transactions on Instrumentation and Measurement
The deflection of the vertical (DOV) constitutes a critical error source that fundamentally limits the positioning accuracy of high-precision inertial navigation systems (INS) during long-duration navigation. Building upon our previous work that pioneered the relative estimation method for DOV using double alignment (RE-DA), this study conducts a systematic error analysis of the approach, with particular emphasis on the critical role of precise level attitude determination in DOV estimation. Through observability degree analysis, we propose two innovative multi-position alignment schemes tailored for dual-axis and tri-axis rotational INS (RINS) architectures to achieve enhanced precision in horizontal attitude determination. To address practical implementation challenges, we develop a hybrid compensation strategy integrating inertial alignment principles with a state-error extended Kalman filter. This framework enables real-time compensation for inertial measurement unit (IMU) systematic errors, sensor nonlinearities, and accelerometer lever arm effects. Furthermore, for practical applications characterized by vehicle sway motion, we implement an attitude-tracking-based dynamic error compensation algorithm during horizontal velocity computations. Extensive Monte-Carlo simulations and practical experiments are conducted to evaluate the performance of the proposed approach. Compared with conventional alignment methods, the experiment results indicate superior performance and the accuracy improvement of pitch and roll angles are about 65.8% and 59.1%, respectively.