Liqun Ma

Dr. Liqun Ma

orcid

Research Focus & Metrics

Representative Publications

View All Publications
30 June 2020 in Reviews of Adhesion and Adhesives
Verified
Journal Article
Closed access
LMLiqun Ma
Liqun Ma
ZZZichen Zhang
Zichen Zhang
LGLinyue Gao
Linyue Gao
Yang LiuYang Liu
Yang Liu
HHHui Hu
Hui Hu
A critical review is provided to summarize our recent efforts to utilize the state-of-the-art bio-inspired icephobic coatings/surfaces, i.e., 1). Lotus-leaf-inspired superhydrophobic surfaces (SHS) and 2). Pitcher-plant-inspired slippery liquid-infused porous surfaces (SLIPS) for aircraft icing mitigation. By leveraging the unique Icing Research Tunnel of Iowa State University (i.e., ISU-IRT), an experimental campaign was performed to evaluate the effectiveness of using SHS and SLIPS coatings to suppress impact ice accretion over the surfaces of typical airfoil/wing models. While both SHS and SLIPS were found to be able to suppress ice accretion over the airframe surfaces where strong aerodynamic forces are exerted, ice was still found to accrete in the vicinity of the airfoil stagnation line where the aerodynamic forces are at their minimum. A novel hybrid anti-/de-icing strategy concept to combine icephobic coatings with minimized surface heating near airfoil leading edge was demonstrated to effectively remove impact ice accretion over entire airfoil/wing surfaces. An experimental investigation was also conducted to examine the durability of the icephobic coatings/surfaces to resist "rain erosion" effects (i.e., the damage to the surface coatings due to continuous impingement of water droplets at high speeds) in considering the practical usage for aircraft icing mitigation. The rain erosion effects were characterized based on the variations of the ice adhesion strengths and surface morphology of the eroded test surfaces coated with SHS and SLIPS. The research findings are very helpful to elucidate the underlying physics for the development of novel and robust anti-/de-icing strategies for aircraft icing mitigation.

1 May 2023 in International Journal of Advanced Robotic Systems
Verified
Journal Article
Open access
LMLiqun Ma
Liqun Ma
DMDongyuan Meng
Dongyuan Meng
SZShuaihe Zhao
Shuaihe Zhao
BABinbin An
Binbin An
Absolute visual localization is of significant importance for unmanned aerial vehicles when the satellite-based localization system is not available. With the rapid evolution in the field of deep learning, the real-time visual detection and tracking of landmarks by an unmanned aerial vehicle could be implemented onboard. This study demonstrates a landmark-based visual localization framework for unmanned aerial vehicles flying at low altitudes. YOLOv5 and DeepSORT are used for multi-object detection and tracking, respectively. The unmanned aerial vehicle localization is achieved according to the geometric similarity between the geotagged transmission towers and the annotated images captured by a monocular camera. The validation is accomplished both in the Rflysim-based simulation and the quadrotor-based real flight. The localization precision is about 10 m, and the location update frequency reaches 5 Hz with a commercially available entry-level edge artificial intelligence platform. The proposed visual localization strategy needs no satellite image as a reference map, which saves a significant amount of the GPU memory and makes possible the end-to-end implementation on small unmanned aerial vehicles.

18 July 2023 in IEEE Access
Verified
Journal Article
Open access
LMLiqun Ma
Liqun Ma
DMDongyuan Meng
Dongyuan Meng
XHXu Huang
Xu Huang
SZShuaihe Zhao
Shuaihe Zhao
Formation control of a UAV swarm is challenging in outdoor GNSS-denied environments due to the difficulties in accomplishing relative positioning among the UAVs. This study proposes a vision-based formation control strategy that could be implemented in the absence of an external positioning system. The hierarchical architecture has been constructed for the UAV swarm using the modified leader-follower strategy. The leader UAV derives and broadcasts the locations of the follower UAVs, while the follower UAVs calculate their control inputs to achieve the desired swarm formation. The vision-based localization of the UAVs is accomplished using state-of-the-art deep learning algorithms like YOLOv7 and DeepSORT. The RflySim-based simulation has been conducted to verify the feasibility of the conceptualization, and the validation has been made with a real flight test using a swarm comprised of five quadrotors. Results show the robustness of the vision-based UAV positioning framework with a localization error within 0.3 m. Moreover, the formation control without the GNSS is achieved with a monocular camera and the entry-level AI platforms implemented onboard, which could be promoted to UAV swarm applications for broader scenarios.

10 June 2025 in Drones
Verified
Journal Article
Open access
PDF file
Chang LiuChang Liu
Chang Liu
YZYang Zhang
Yang Zhang
LMLiqun Ma
Liqun Ma
YHYong Huang
Yong Huang
KLKeyan Liu
Keyan Liu
GWGuangwei Wang
Guangwei Wang
In this study, we introduce an Unmanned Aerial Vehicle (UAV) centric visual semantic simultaneous localization and mapping (SLAM) framework that integrates RGB–D cameras, inertial measurement units (IMUs), and a 5G–enabled remote interaction module. Our system addresses three critical limitations in existing approaches: (1) Distance constraints in remote operations; (2) Static map assumptions in dynamic environments; and (3) High–dimensional perception requirements for UAV–based applications. By combining YOLO–based object detection with epipolar–constraint-based dynamic feature removal, our method achieves real-time semantic mapping while rejecting motion artifacts. The framework further incorporates a dual–channel communication architecture to enable seamless human–in–the–loop control over UAV–Unmanned Ground Vehicle (UGV) teams in large–scale scenarios. Experimental validation across indoor and outdoor environments indicates that the system can achieve a detection rate of up to 75 frames per second (FPS) on an NVIDIA Jetson AGX Xavier using YOLO–FASTEST, ensuring the rapid identification of dynamic objects. In dynamic scenarios, the localization accuracy attains an average absolute pose error (APE) of 0.1275 m. This outperforms state–of–the–art methods like Dynamic–VINS (0.211 m) and ORB–SLAM3 (0.148 m) on the EuRoC MAV Dataset. The dual-channel communication architecture (Web Real–Time Communication (WebRTC) for video and Message Queuing Telemetry Transport (MQTT) for telemetry) reduces bandwidth consumption by 65% compared to traditional TCP–based protocols. Moreover, our hybrid dynamic feature filtering can reject 89% of dynamic features in occluded scenarios, guaranteeing accurate mapping in complex environments. Our framework represents a significant advancement in enabling intelligent UAVs/UGVs to navigate and interact in complex, dynamic environments, offering real-time semantic understanding and accurate localization.

31 October 2026 in Drones
Verified
Journal Article
Open access
PDF file
YWYirui Wang
Yirui Wang
LMLiqun Ma
Liqun Ma
Chang LiuChang Liu
Chang Liu
YSYufei Sun
Yufei Sun
YZYang Zhang
Yang Zhang
YHYong Huang
Yong Huang
Designing complex UAV swarm performances like drone light shows and aerial displays demands both geometric precision and expressive flexibility, yet existing approaches rely on manually crafted trajectories, requiring substantial manual effort and limiting creative flexibility. While recent large language models (LLMs) offer an opportunity to bridge natural language intent and trajectory generation, general-purpose LLMs lack the geometric reasoning needed to produce spatially consistent paths. We propose an interactive end-to-end framework that translates natural language and speech instructions into executable multi-agent flight trajectories, in which language-specified 2D patterns are mapped to 3D flight coordinates at assigned altitudes. Our approach introduces SVG path commands as a vectorized representation that is both LLM-friendly and geometrically precise, serving as a semantic–geometric bridge. To equip LLMs with geometric awareness, we construct a difficulty-tiered dataset and perform supervised fine-tuning (SFT) with LoRA, complemented by greedy nearest-neighbor target assignment and BallTree-accelerated artificial potential field (APF) deconfliction for scalable execution. Experiments across ten frontier LLMs reveal a pronounced capability cliff: the best Tier 1 accuracy ranges from 88% to 92% across the two judges, whereas Tier 2 accuracies range from 0% to 26% across models and judges. After domain enhancement, our SFT-enhanced 4B-parameter model with few-shot prompting achieves 80% on basic shapes and 22% on text outlines, giving 51% overall accuracy versus 43% for the 9B model under the tested configurations. Different LoRA ranks and training token cutoffs confound this scale comparison. The Llama comparison also shows that fine-tuning gains do not generalize across the tested model families and settings. The 2 m minimum-separation threshold is satisfied in 95–100% of randomized-seed runs for swarms up to N=50 under the tested grid-launch protocol and in all tested phased-deployment runs for the N=100 dense text formation; these are empirical results rather than formal safety guarantees. The structural validity of the recommended fine-tuned configuration reaches 100% on both tiers (versus 0–34% for the two Qwen pretrained baseline configurations), and AirSim physics-based simulation validation reports a mean formation error below 1 m for five of six tested patterns, averaged from the minimum-error frame to the end of each run, with one transient separation violation observed in a single pattern. For small and moderate swarms, the offline design cycle takes approximately 30–74 s and is dominated by one LLM inference call; the densest N=200 case additionally requires up to 48.7 s for APF convergence.

1 August 2021 in 14th International Symposium on Particle Image Velocimetry
Verified
Journal Article
Open access
PDF file
LMLiqun Ma
Liqun Ma
ZZZichen Zhang
Zichen Zhang
HHHui Hu
Hui Hu
Aircraft icing is widely recognized as one of the most serious weather hazards to flight safety. Specially designed hydro-/ice-phobic coatings are currently undergoing development for aircraft icing mitigation. It was found that hydro-/icephobic coatings would delay the ice accretion iover airframe surfaces so that the impacted supercooled water droplets could be blown away by the airflow from the airframe surface before being frozen into ice. It is of fundamental importance to understand the wind-driven runback behavior of water droplets over surfaces treated with different coatings, since the corresponding knowledge would be very helpful and essential to develop more efficient anti-/de-icing systems for aircraft icing protection. With the rapid development of surface engineering, a series of specially designed surface coatings succeed in icing mitigation using airflow to remove the remained water. While various hydro-/ice-phobic coatings/surfaces have been developed in recent years, the “state-of-the-art” icephobic coatings/surfaces can be generally divided into three categories, i.e., 1). Lotus-leaf-inspired superhydrophobic surfaces (SHS) with micro-/nano-scale surface textures to achieve very high contact angles (typically > 150°); 2). Pitcherplant-inspired slippery liquid infused porous surfaces (SLIPS) with a layer of liquid lubricant (which is immiscible with water) being sandwiched between ice and solid substrate materials; and 3). Icephobic elastic materials/surfaces with deformable structures/surfaces. SHS has a water droplet contact angle (CA) larger than 150° and a sliding angle (SA) less than 10° . SHS always has a hierarchical structure which is similar to the lotus leaf, and water droplets on SHS appear as water beads which can easily roll off the surface by wind or gravity before frozen. Another strategy to reduce ice adhesion strength to a solid surface is to use a layer of liquid lubricant, which is immiscible with water, between ice and the solid surface. The use of such lubricated surfaces was investigated as early as 1960s, and has gained increasing attentions again recently with the introduction of a concept called Slippery Liquid-Infused Porous Surfaces (SLIPS). SLIPS concept is inspired by the Nepenthes pitcher plants, which have evolved highly slippery, liquidinfused micro-textured rim to capture insects. SLIPS surfaces were not only found to be able to suppress ice/frost accretion by effectively removing condensed moisture even in high humidity conditions, but also exhibit at least an order of magnitude lower ice adhesion than most SHS coatings. More recently, elastic materials/surfaces, such as Polydimethylsiloxane or PDMS in short, which would be structurally deformed/altered dynamically upon applying extra mechanical stress, have also been suggested for icing mitigation. Elastic materials display ultra-low adhesion to ice due to their low work of adhesion and liquidlike deformability, while maintaining good mechanical durability due to their solid-like rigidity. It is found that water droplets would not only be more readily rebounding away from the surface after impingement, but also be able to roll away before frozen due to the hydrophobicity of PDMS. Considering the differences in wettabilities and mechanisms of water repellency, it is necessary to have a systematic understanding of how efficient the surfaces are when the aerodynamic force is applied to remove the adhered water droplets. In the present study, a comprehensive experimental campaign was conducted to characterize the transient runback behaviors of wind-driven water droplets over the surfaces of test plates coated with different hydro-/icephobic coatings (i.e., SHS, SLIPS and PDMS). A high-resolution Particle Image Velocimetry (PIV) system was used to achieve quantitative measurements of the velocity field of the airflow around the wind-driven water droplets on the test surfaces with different wettabilities. With the detailed PIV measurements of the airflow field around the runback water droplets and the droplet profiles, the aerodynamic forces and the adhesion forces acting on the water droplets were estimated. While Fig. 1 shows the experimental setup used in the present study, Fig. 2 to Fig. 3 given some of the typical measurement results. More measurement results and comprehensive analysis and discussions will be provided in the full version of this research paper.