Haotian Zeng

Haotian Zeng

Auto-generated profile, based on publicly available information

Haotian Zeng

University College London

Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
2 September 2020 in Nanotechnology
Verified
Journal Article
Open access
PDF file
HZHaotian Zeng
Haotian Zeng
XYXuezhe Yu
Xuezhe Yu
HFH. Aruni Fonseka
H. Aruni Fonseka
GBGiorgos Boras
Giorgos Boras
PJPamela Jurczak
Pamela Jurczak
HLHuiyun Liu
Huiyun Liu
One of the nanowire (NW) characteristics is its preferred elongation direction. Here, we investigated the impact of Si substrate crystal orientation on the growth direction of GaAs NWs. We first studied the self-catalyzed GaAs NW growth on Si (111) and Si (001) substrates. SEM observations show GaAs NWs on Si (001) are grown along four directions without preference on one or some of them. This non-preferential NW growth on Si (001) is morphologically in contrast to the extensively reported vertical preferred GaAs NW growth on Si (111) substrates. We propose a model based on the initial condition of an ideal Ga droplet formation on Si substrates and the surface free energy calculation which takes into account the dangling bond surface density for different facets. This model provides further understanding of the different preferences in the growth of GaAs NWs along selected directions depending on the Si substrate orientation. To verify the prevalence of the model, NWs were grown on Si (311) substrates. The results are in good agreement with the three-dimensional mapping of surface free energy by our model. This general model can also be applied to predictions of NW preferred growth directions by the vapor-liquid-solid growth mode on other group IV and III–V substrates.

11 January 2023 in Heliyon
Verified
Journal Article
Open access
TYTengfei Yang
Tengfei Yang
HZHaotian Zeng
Haotian Zeng
DLDongri Li
Dongri Li
JKJiangwei Kong
Jiangwei Kong
XCXinzhe Chen
Xinzhe Chen
DLDongri Li
Dongri Li
This study aimed to explore the trend and main influencing factors of road traffic accidents in Guangzhou, China, from 2007 to 2020 and to provide a reference and guidance for government decision-making. A retrospective cohort study was used to describe road traffic accidents in Guangzhou. According to the population types, all people with road traffic accidents were divided into migrant workers and the control population. We divided road users, administrative districts, motorcycle types and injury levels into subgroups to investigate the characteristics of road traffic accidents in Guangzhou. The road traffic accident data were derived from the Guangzhou Public Security Traffic Management Integrated System. The incidence rate of road traffic accidents per 10,000 vehicles in Guangzhou decreased from 36.55 in 2007 to 10.07 in 2012, remained relatively stable at 9.47 in 2017, and finally rose to 11.12 in 2020. The injury rate showed the same trend as the incidence rate, while the mortality rate gradually decreased from 14.21 in 2007 to 5.19 in 2020. Vulnerable road users such as motorized two-to-three-wheeler drivers and migrant workers were casualties in more than 80% of the cases. The proportion of casualties involving mopeds and electric bicycles increased rapidly after 2018. Motor vehicle drivers frequently caused road traffic accidents and were most often uninjured. Road safety in Guangzhou has shown a clear trend of improvement, but casualties are uneven across administrative districts. More attention should be given to motorized two-to-three-wheelers, migrant workers, and road traffic violations by uninjured individuals.

1 December 2024 in APL Materials
Verified
Journal Article
Open access
PDF file
JYJiajing Yuan
Jiajing Yuan
CDCalum Dear
Calum Dear
HJHui Jia
Hui Jia
JPJae-Seong Park
Jae-Seong Park
YHYaonan Hou
Yaonan Hou
HLHuiyun Liu
Huiyun Liu
High-quality InAs/InP quantum dots (QDs) emitting at 1550 nm are indispensable to realize high-performance telecom C-band lasers. In general, a longer emission (>1550 nm) with a broad spectral character has been obtained with InAs/InP QDs. Here, we proposed the use of the indium-flush (IF) method to shorten the emission and improve the optical properties of InAs/InP QDs. By exploiting IF, the full-width at half-maximum of the room-temperature QD photoluminescence spectra is narrowed from 89.2 to 47.9 meV, with a blue shift of 300 nm (from 1824 to 1522 nm). The scanning transmission electron microscopy and electron energy loss spectroscopy results reveal the atomic-level mechanism of the IF method, which uniformly modify the height of InAs/InP QDs in a controlled manner and form distinct Al-rich and In-rich regions. Finally, InAs/InP (001) QD lasers with the IF method have been demonstrated with a low threshold current density per QD layer of 106 A/cm2. We demonstrated both in terms of mechanism model and device performance that the IF method could serve as a robust strategy for the growth of high-performance C-band InAs/InP QD lasers via molecular beam epitaxy.

1 April 2025 in APL Materials
Verified
Journal Article
Open access
XZXuanchang Zhang
Xuanchang Zhang
HDHuiwen Deng
Huiwen Deng
HZHaotian Zeng
Haotian Zeng
HJHui Jia
Hui Jia
MBMengxun Bai
Mengxun Bai
Mingchu TangMingchu Tang
Mingchu Tang
The direct epitaxy of III–V materials on CMOS-compatible on-axis Si (001) is vital for scalable, cost-effective optoelectronic devices. However, material dissimilarities introduce crystal defects, such as antiphase boundaries (APBs) and threading dislocations (TDs), impairing performance. This study refines Si surface step stability modeling by incorporating temperature-dependent effects, elucidating single atomic step stability under high-temperature III–V growth conditions. We achieve APB-free III–V growth on Si (001) through (1) a 10 monolayer thin Si buffer layer enabling single atomic steps and (2) direct GaAs epitaxy on Ar plasma-treated Si. We identify wave-shaped Sb edge steps as key to APB self-annihilation and demonstrate that an ultra-thin Si buffer effectively suppresses APBs while minimizing thermal strain. In addition, we evaluate Ar plasma treatment, showing that it enables APB-free GaAs growth, with a Si buffer further enhancing step periodicity and reducing TD density. These insights optimize III–V/Si integration, advancing CMOS-compatible optoelectronic technologies.

19 May 2025 in Advanced Physics Research
Verified
Journal Article
Open access
MMMakhayeni Mtunzi
Makhayeni Mtunzi
HJHui Jia
Hui Jia
MMMateus G. Masteghin
Mateus G. Masteghin
YHYaonan Hou
Yaonan Hou
HZHaotian Zeng
Haotian Zeng
HLHuiyun Liu
Huiyun Liu
The propagation of antiphase boundaries (APBs) and threading dislocations (TDs) poses a significant impediment to the realisation of high‐quality group III–V semiconductors grown on group IV platforms. The complete annihilation of APBs and a substantial reduction in threading dislocation density (TDD) are essential for achieving high‐efficiency III–V devices compatible with complementary metal‐oxide semiconductor (CMOS) technology. In this study, a novel growth technique is proposed and developed to fabricate a faceted germanium (Ge) buffer on a discontinuous (111)‐faceted V‐groove silicon (Si) substrate with a 500 nm flat ridge width. Subsequently, a GaAs buffer is grown on the Ge/V‐groove Si virtual substrate using a ramped temperature growth process to minimise the prevalence of line and planar defects in the buffer structure. An APB‐free GaAs buffer is successfully achieved, as confirmed by cross‐sectional and plan‐view transmission electron microscopy (TEM) and atomic force microscopy (AFM) analyses. The faceted Ge buffer layer obtained through this innovative approach alleviates the stringent fabrication requirements and intricate processing typically associated with conventional continuous V‐groove Si substrates. This advancement facilitates the development of photonic integrated circuits by providing a simplified and efficient alternative substrate solution.

17 October 2025 in Journal of Physics D: Applied Physics
Verified
Journal Article
Open access
XZXuanchang Zhang
Xuanchang Zhang
HZHaotian Zeng
Haotian Zeng
HJHui Jia
Hui Jia
XYXueying Yu
Xueying Yu
SHSuguo Huo
Suguo Huo
Mingchu TangMingchu Tang
Mingchu Tang
Heteroepitaxial growth of Si-based semiconductor materials has become an efficient method for high-performance group-IV and III–V optoelectronic and electronic devices. As-manufactured epi-ready Si wafers frequently retain molecular residues even after high-temperature thermal deoxidation. Consequently, additional surface conditioning can be required to achieve the cleanliness and morphology necessary for high-quality epitaxial growth. This study evaluates the effectiveness of Ar plasma pre-treatment for surface preparation of Si substrates, which is used as a platform for heteroepitaxial growth of group-IV and III–V materials in molecular beam epitaxy systems. In this paper, a brief Ar plasma exposure (3 min at 30 SCCM) effectively removed native oxides and preserved atomically smooth surfaces, with root-mean-square roughness below 0.25 nm. Ge layers grown on plasma-treated offcut Si substrates exhibited a threading dislocation density of 6.9 × 107cm−2, representing a ∼55% reduction compared to non-treated substrates (1.3 × 108cm−2). These findings demonstrate that Ar plasma pre-treatment provides a reliable and thermally efficient pathway for enhancing Si surface quality and supporting low-defect heteroepitaxial growth.