14 March 2020 in Computers in Biology and Medicine
27 August 2016 in Experiments in Fluids
TMTristan Van de Moortele
10 October 2018 in Physical Review Fluids
TMTristan Van de Moortele
We investigate the steady expiratory and the oscillatory flow in a planar double bifurcation model with geometric proportions relevant to the respiratory human airways. Expanding on a previous study focused on steady inspiration [Jalal et al., Exp. Fluids 57, 148 (2016)], we use magnetic resonance velocimetry to characterize the three-dimensional velocity field for a range of Reynolds (Re) and Womersley (Wo) numbers. During expiration the velocity profiles are flatter than in inspiration, due to stronger secondary motions. The latter are characterized by counter-rotating streamwise vortices induced by curvature at the branch junctions. With increasing Re, the vortices gain strength, and for they propagate through successive branching generations, profoundly changing the secondary flow pattern. Under oscillatory conditions, as long as the ventilation frequency is in the normal respiration range, the flow topology for both inhalation and exhalation phases is similar to the corresponding steady cases over most of the breathing cycle. On the other hand, in the high-frequency ventilation regime (), the acceleration part of both inhalation and exhalation phases show signature features of oscillatory flows, with high-momentum regions located close to the walls. The phenomenon of counterflow is found to be prominent at , with reverse flow pockets marking the velocity field especially during the inhalation-exhalation inversion. With increasing oscillation frequency, the secondary motions become more intense during the inhalation phase but are attenuated during the exhalation phase of the cycle. The cycle-averaged drift is found to be significant at low Wo but decreases with increasing ventilation frequency, suggesting that steady streaming is not the main transport mechanism during high-frequency ventilation.
17 June 2020 in Physical Review Fluids
TMTristan Van de Moortele
In this study, we investigate the steady inhalation, steady exhalation, and oscillatory flow in a realistic airway geometry for physiologically relevant regimes ranging from quiet breathing to respiration under high frequency ventilation (HFV). We use magnetic resonance velocimetry to characterize and quantify three-dimensional (3D) velocity fields in 3D printed replicas of realistic bronchial trees. Expanding on previous studies [Jalal et al., Exp. Fluids 57, 148 (2016); Jalal et al., Phys. Rev. Fluids 3, 103101 (2018)] which focused on respiration in planar double bifurcation geometries, we compare levels of axial and lateral dispersion, and find that they exceed those found in the idealized models. Furthermore, we find that the secondary flows in realistic airways propagate deep in the bronchial tree and are stronger during exhalation as compared to inhalation, while the mean flow topology does not vary significantly between the two steady regimes. Under HFV, we note significant regions of flow reversal during the inhalation-exhalation and exhalation-inhalation transitions. This is found to be due to a difference in impedance (dominated by inertance) in the different regions of the lung and results in an asynchronous ventilation between the upper and lower lobes. This phenomenon, also known as pendulluft is demonstrated experimentally for the first time, using both Eulerian velocity fields and Lagrangian pathlines. Secondary flows are stronger in exhalation compared to inhalation and at the peak of the ventilation cycle, match the steady cases although the flow topology can be significantly different. Finally, the cycle-averaged drift velocity suggests that steady streaming, while not negligible, is not the main transport mechanism during high-frequency ventilation.
1 July 2014 in American Journal of Physics