11 April 2019 in IEEE/ASME Transactions on Mechatronics
This paper presents a variable admittance control method to achieve intuitive human–robot interactions that consider human intentions. Human intention is classified into two categories—direct and indirect. With respect to direct intention, the concept of standard force is introduced to adjust the interacting force. The proposed variable admittance control method improves intuitiveness when velocity is used as an estimate of direct intention. In the estimation of indirect intention, a force guidance method is suggested to make a robot follow and guide a human. The proposed control methodology is adapted to a six-DOF manipulator based on a one-dimensional analysis. The experiments are conducted with a manipulator (Universal Robots, UR10) and a force/torque sensor (Robotus, RFT60-HA) to evaluate the performance. The experiments validate that variable admittance control enhances the execution time, accuracy, and comfort of the operator.
26 February 2020 in IEEE Transactions on Industrial Electronics
This article presents a sensor, called a skin-type dual proximity sensor (STPS) that can provide distance information in the form of impedance between a sensor and an approaching object before the collision. Meanwhile, a new method regarding the selection of the resonant frequency range for optimizing the measured distance is validated. The sensor adopts the combined sensing principle of inductive-capacitive proximity sensing. STPS can be fabricated with various dimensions and shapes, and easily attached to robot surfaces. Represented by the series of sensors studied with the dimensions of 100 × 100 × 2.75 mm, the proposed sensor can detect an approaching human body up to 300 mm away. In this article, sensor system modeling and simulation are conducted, followed by fabrication and signal processing methods. Finally, the performances of the sensor are experimentally validated, thoroughly analyzed concerning various parameters, and demonstrated with the collaboration between human and robots.
11 August 2020 in IEEE Robotics and Automation Letters
Force/Torque (F/T) sensing technology enables a dexterous robot control such as direct teaching, master-slave system, and pick-and-place task. In general, 6-axis F/T sensor is attached to the end-effector of the robot manipulator to assist in utilizing advanced robot systems. However, in actual applications, various tools such as robotic grippers, robotic hand, grinders are attached to the sensor and it causes F/T offset} with respect to the gravity. In this letter, Autonomous Weight Compensating(AWC) technique for 6-axis F/T sensor is presented. The proposed AWC technique can reduce the F/T offsets by estimating the F/T offsets through installed Inertial Measurement Unit(IMU) sensor. In this study, the 6-axis F/T are measured based on capacitance sensing scheme and to estimate the orientation of the sensor, a 9-axis IMU sensor is installed inside of the sensor. Then, the F/T offsets are calibrated via Artificial Neural Network(ANN) model. As a result, the sensor can reduce the F/T offsets without any additional computing time in robot operating period. Finally, the performance of the proposed method is demonstrated through comparing the F/T data with both trained data and untrained data.
2 June 2021 in Intelligent Service Robotics