Functionalized and fully characterized graphene-based lubricant additives are potential 2D materials for energy-efficient tribological applications in machine elements, especially at macroscopic contacts. Two different reduced graphene oxide (rGO) derivatives, terminated by hydroxyl and epoxy-hydroxyl groups, were prepared and blended with two different molecular weights of polyethylene glycol (PEG) for tribological investigation. Epoxy-hydroxyl-terminated rGO dispersed in PEG showed significantly smaller values of the friction coefficient. In this condition, PEG chains intercalate between the functionalized graphene sheets, and shear can take place between the PEG and rGO sheets. However, the friction coefficient was unaffected when hydroxyl-terminated rGO was coupled with PEG. This can be explained by the strong coupling between graphene sheets through hydroxyl units, causing the interaction of PEG with the rGO to be non- effective for lubrication. On the other hand, antiwear properties of hydroxyl-terminated rGO were significantly enhanced compared to epoxy-hydroxyl functionalized rGO due to the integrity of graphene sheet clusters.
27 January 2015 in ACS Applied Materials & Interfaces
Hybrid nanomaterials offer task-specific functional properties besides the individual properties of their constituent materials/elements. Herein, graphene–ionic liquid (Gr–IL) hybrid nanomaterials are synthesized to integrate the friction-reducing properties of both ionic liquids and graphene nanosheets. Importantly, the remarkable mechanical strength of graphene improves the anti-wear performance, whereas covalently grafted ionic liquids facilitate the dispersion of the Gr–IL in the polyethylene glycol (PEG 200) synthetic lube base oil. Graphene, prepared by a controlled chemical approach, is used for the covalent grafting of an imidazolium ring. Three variable Gr–IL hybrid nanomaterials, containing bis(salicylato)borate (BScB), oleate (OL), and hexafluorophosphate (PF6) anions, are synthesized to control their surface properties. Detailed chemical and microstructural features of the Gr–IL hybrid nanomaterials are studied using FTIR, XPS, Raman, XRD, FESEM, and HRTEM analyses. The Gr–IL hybrid nanomaterials as lubricant additives for PEG 200 significantly reduced the friction and the wear. Further, the Gr–IL hybrid nanomaterials offer remarkably improved anti-wear properties (55–78%) compared to that of the corresponding ionic liquid (7–39%) blends in PEG 200 and this was attributed to the high mechanical strength of graphene, which protects the contact interfaces against material loss. The elemental and micro-Raman results of the worn surfaces suggested the formation of a tribo-chemical thin film composed of Gr–IL and its tribo-chemical products with steel interfaces. The BScB anion constituted Gr–BScB showed the maximum reduction in friction, whereas the OL analogue exhibited the smallest wear. This study reveals the potential of task-specific Gr–IL hybrid nanomaterials as novel additives for diversified tribological applications.
Optimized concentration of reduced graphene oxide (rGO) in the lube is one of the important factors for effective lubrication of solid body contacts. At sufficiently lower concentration, the lubrication is ineffective and friction/wear is dominated by base oil. In contrast, at sufficiently higher concentration, the rGO sheets aggregates in the oil and weak interlayer sliding characteristic of graphene sheets is no more active for providing lubrication. However, at optimized concentration, friction coefficient and wear is remarkably reduced to 70% and 50%, respectively, as compared to neat oil. Traditionally, such lubrication is described by graphene/graphite particle deposited in contact surfaces that provides lower shear strength of boundary tribofilm. In the present investigation, graphene/graphite tribofilm was absent and existing traditional lubrication mechanism for the reduction of friction and wear is ruled out. It is demonstrated that effective lubrication is possible, if rGO is chemically linked with PEG molecules through hydrogen bonding and PEG intercalated graphene sheets provide sufficiently lower shear strength of freely suspended composite tribofilm under the contact pressure. The work revealed that physical deposition and adsorption of the graphene sheets in the metallic contacts is not necessary for the lubrication.
A single step facile approach for grafting of long alkyl chains in the basal plane of graphene oxide and simultaneous reduction of oxygen functionalities to restore the graphitic characteristics, is reported. Chemical and structural features of the synthesized dual-layer alkylated graphene are elucidated by infrared, 13C solid state nuclear magnetic resonance, X-ray diffraction, and high-resolution transmission electron microscopy analyses. The van der Waals interaction between the octadecyl chains grafted on graphene and the alkyl chains of lube oils provided long-term dispersion stability to the alkylated graphene. The 0.02 mg mL−1 alkylated graphene as an optimized concentration in the lube oil, decreased both friction and wear significantly under the sliding contacts between steel tribo-pairs. Micro-Raman results demonstrate the deposition of graphene nanosheets on the tribo-interfaces under the sheared contact, and reduced the friction and protects the surfaces against undesirable wear.