7 October 2019 in Geophysical Journal International
SUMMARY: Thermoelasticity extends the classical elastic theory by coupling the fields of particle displacement and temperature. The classical theory of thermoelasticity, based on a parabolic-type heat-conduction equation, is characteristic of an unphysical behaviour of thermoelastic waves with discontinuities and infinite velocities as a function of frequency. A better physical system of equations incorporates a relaxation term into the heat equation; the equations predict three propagation modes, namely, a fast P wave (E wave), a slow thermal P wave (T wave), and a shear wave (S wave). We formulate a second-order tensor Green's function based on the Fourier transform of the thermodynamic equations. It is the displacement–temperature solution to a point (elastic or heat) source. The snapshots, obtained with the derived second-order tensor Green's function, show that the elastic and thermal P modes are dispersive and lossy, which is confirmed by a plane-wave analysis. These modes have similar characteristics of the fast and slow P waves of poroelasticity. Particularly, the thermal mode is diffusive at low thermal conductivities and becomes wave-like for high thermal conductivities.
8 April 2021 in Geophysics
Thermoelasticity is important in seismic propagation due to the effects related to wave attenuation and velocity dispersion. We have applied a novel finite-difference (FD) solver of the Lord-Shulman thermoelasticity equations to compute synthetic seismograms that include the effects of the thermal properties (expansion coefficient, thermal conductivity, and specific heat) compared with the classic forward-modeling codes. We use a time splitting method because the presence of a slow quasistatic mode (the thermal mode) makes the differential equations stiff and unstable for explicit time-stepping methods. The spatial derivatives are computed with a rotated staggered-grid FD method, and an unsplit convolutional perfectly matched layer is used to absorb the waves at the boundaries, with an optimal performance at the grazing incidence. The stability condition of the modeling algorithm is examined. The numerical experiments illustrate the effects of the thermoelasticity properties on the attenuation of the fast P-wave (or E-wave) and the slow thermal P-wave (or T-wave). These propagation modes have characteristics similar to the fast and slow P-waves of poroelasticity, respectively. The thermal expansion coefficient has a significant effect on the velocity dispersion and attenuation of the elastic waves, and the thermal conductivity affects the relaxation time of the thermal diffusion process, with the T mode becoming wave-like at high thermal conductivities and high frequencies.
3 March 2020 in Geophysical Journal International
SUMMARY: The Lord–Shulman thermoelasticity theory combined with Biot equations of poroelasticity, describes wave dissipation due to fluid and heat flow. This theory avoids an unphysical behaviour of the thermoelastic waves present in the classical theory based on a parabolic heat equation, that is infinite velocity. A plane-wave analysis predicts four propagation modes: the classical P and S waves and two slow waves, namely, the Biot and thermal modes. We obtain the frequency-domain Green's function in homogeneous media as the displacements-temperature solution of the thermo-poroelasticity equations. The numerical examples validate the presence of the wave modes predicted by the plane-wave analysis. The S wave is not affected by heat diffusion, whereas the P wave shows an anelastic behaviour, and the slow modes present a diffusive behaviour depending on the viscosity, frequency and thermoelasticity properties. In heterogeneous media, the P wave undergoes mesoscopic attenuation through energy conversion to the slow modes. The Green's function is useful to study the physics in thermoelastic media and test numerical algorithms.
22 September 2020 in Journal of Geophysical Research: Solid Earth
P and SV wave scattering by thermally constrained saturated cracks couples elastic deformation with temperature. We estimate the scattering attenuation and velocity dispersion by aligned fluid‐saturated cracks with finite thickness, which are sparsely and randomly embedded in an isothermal and isotropic elastic medium. By incorporating thermoelastic effects into the representation theorem with the non‐interaction Foldy approximation, we formulate the dispersion and attenuation of P and SV waves induced by displacement discontinuities across aligned cracks constrained by a thermoelastic boundary condition. The frequency‐dependent response as a function of temperature is calculated for various P and SV wave incidence angles. The resulting scattering attenuation and dispersion are compared with those of the conventional aligned‐crack model. The examples show that the dissipation increases with increasing temperature, but the scattering is inhibited at a given temperature. The P wave shows a strong sensitivity to temperature along the direction normal to the cracks, whereas the SV wave has an opposite behavior. This theory has the potential to assess the distribution of temperature from seismic attributes.
1 July 2022 in Geophysics
High temperature affects the seismic properties of cracked and faulted reservoirs and can be an indicator for their detection. To this purpose, the authors study the wave-induced thermal flux (WITF) and develop two exact solutions for the scattering of compressional waves by a circular crack filled with a compressible fluid, in which the approach is based on thermally permeable and impermeable boundary conditions. The authors obtained the phase velocity and attenuation as a function of frequency, which found that there are two loss mechanisms, i.e., thermoelastic dissipation at low frequencies and elastic scattering at high frequencies. Basically, when the crack size is comparable to the thermal and elastic wavelengths, there are substantial dispersion and attenuation (anelasticity) in the WITF and scattering frequency ranges, respectively. This means that the spatial inhomogeneity scale for inducing WITF is much smaller than that of scattering and the two mechanisms can be discriminated. The dependence of the compressional-wave velocity and attenuation on the compressibility and thermal expansion of the crack-filling fluid are different depending on the thermal diffusion rates at the crack interface. The anelasticity is much higher in the fully permeable case. This model has the potential to evaluate thermoelastic properties and heterogeneity at different scales from seismic responses.
21 November 2024 in Journal of Geophysical Research: Solid Earth