Department of Energy Engineering, School of Energy and Chemical Engineering, Ulsan National Institute of Science and Technology (UNIST), Ulsan 44919, Korea
Auto-generated profile, based on publicly available information
JongTae Yoo
Department of Energy Engineering, School of Energy and Chemical Engineering, Ulsan National Institute of Science and Technology (UNIST), Ulsan 44919, Korea
Bipolar all-solid-state lithium-ion batteries (LIBs) have attracted considerable attention as a promising approach to address the ever-increasing demand for high energy and safety. However, the use of (sulfide- or oxide-based) inorganic solid electrolytes, which have been the most extensively investigated electrolytes in LIBs, causes problems with respect to mechanical flexibility and form factors in addition to their longstanding issues such as chemical/electrochemical instability, interfacial contact resistance and manufacturing processability. Here, we develop a new class of flexible/shape-versatile bipolar all-solid-state LIBs via ultraviolet (UV) curing-assisted multistage printing, which does not require the high-pressure/high-temperature sintering processes adopted for typical inorganic electrolyte-based all-solid-state LIBs. Instead of inorganic electrolytes, a flexible/nonflammable gel electrolyte consisting of a sebaconitrile-based electrolyte and a semi-interpenetrating polymer network skeleton is used as a core element in the printed electrodes and gel composite electrolytes (GCEs, acting as an ion-conducting separator membrane). Rheology tuning (toward thixotropic fluid behavior) of the electrode and GCE pastes, in conjunction with solvent-drying-free multistage printing, enables the monolithic integration of in-series/in-plane bipolar-stacked cells onto complex-shaped objects. Because of the aforementioned material and process novelties, the printed bipolar LIBs show exceptional flexibility, form factors, charge/discharge behavior and abuse tolerance (nonflammability) that far exceed those achievable with inorganic-electrolyte-based conventional bipolar cell technologies.
A longstanding challenge facing energy conversion/storage materials is their low electrical conductivity, which often results in unwanted sluggish electrochemical reactions. Here, we demonstrate a new class of one-pot surface engineering strategy based on metallic single-walled carbon nanotube (mSWCNT)-enriched, ivy-like conductive nanonets (mSC nanonets). The mSC nanonets are formed on the surface of electrode materials through a poly(9,9-di-n-octylfluorenyl-2,7-diyl) (PFO)-assisted sonication/filtration process. PFO is known as a dispersant for SWCNTs that shows a higher affinity for semiconducting SWCNTs (sSWCNTs) than for mSWCNTs. Driven by this preferential affinity of PFO, sSWCNTs are separated from mSWCNTs in the form of sSWCNT/PFO hybrids, and the resulting enriched mSWCNTs are uniformly deposited on electrode materials in the form of ivy-like nanonets. Various electrode materials, including lithium-ion battery cathodes/anodes and perovskite catalysts, are chosen to explore the feasibility of the proposed concept. Due to their ivy-like conductive network, the mSC nanonets increase the electronic conductivity of the electrode materials without hindering their ionic transport, eventually enabling significant improvements in their redox reaction rates, charge/discharge cyclability, and bifunctional electrocatalytic activities. These exceptional physicochemical advantages of the mSC nanonets, in conjunction with the simplicity/versatility of the one-pot surface engineering process, offer a new and facile route to develop advanced electrode materials with faster electrochemical reaction kinetics.