16 March 2018 in IEEE Transactions on Electron Devices
Predictions on limits of silicon in power devices have failed spectacularly in the past, but in spite of that, the theory that generated them is still used today and adapted for wide bandgap materials to justify their superior standing against silicon. The superjunction (SJ) MOSFET was the first device to break by more than one order of magnitude the so-called “limit of silicon” above 600 V. The current theory of SJ seems, however, to define a new technology-based limit rather than a material-based only limit. This implies that by scaling down the dimensions, in particular the cell pitch, the on-state resistances can continually decrease by several orders of magnitude, without a boundary. This paper shows that the downscaling of the cell dimensions cannot happen indefinitely and there is a material-dependent intrinsic limit for any power device, which no longer is limited by the geometry or the technology available. Using an analytical approach, and backed up by advanced numerical simulations, we show that the minimum cell pitch is $0.18~\mu \text{m}$ for silicon and $0.05~\mu \text{m}$ for 4H silicon carbide, and further reduction in the cell pitch would result in an increase in the specific resistance. Finally, a new figure of merit for an SJ MOSFET based on a rigorous 2-D analysis is defined.
30 May 2018 in IEEE Transactions on Electron Devices
In spite of the reporting of several mathematical approaches dealing with the behavior of the superjunction MOSFET's specific resistance, a study for the asymmetrical pillar (when the width of the n-pillar and the p-pillar are not the same at a given cellpitch) has not been carried out yet. When the width of one of the pillar (say n-pillar) is modified, the doping concentration (say donor) should be changed to maintain a charge balance condition. This in turn, changes the width of the depletion region, due to the parasitic JFET effect and as a result the effective on-state conduction path. This raises the question whether the best tradeoff between the specific on-state resistance and the breakdown voltage could be achieved by employing the conventional assumption of the same width of the n and p pillars. This paper clarifies the best option for the width of each pillar when designing a superjunction MOSFET and adapts the figures of merit to take into account the asymmetrical superjunction cell.
5 November 2019 in IEEE Transactions on Electron Devices
The state-of-the-art superjunction (SJ) MOSFETs are based on the p-n pillar structures, arranged in a 2-D stripe geometry. This arrangement uses the superposition of the electric field components at the p-n junctions to create an enhanced depletion volume for higher breakdown capability. In this article, we will discuss structures, which additionally use the component of the electric field in the third dimension, to further enhance the depletion space. This allows higher doping concentrations in the pillars, which result in a better tradeoff between the breakdown voltage and the ON-state resistance, when compared with the 2-D structures. Specifically, we present a core-shell cylindrical SJ structure, and using the radial Poisson equation, we explain the electric field distribution within the SJ. We further discuss which geometry (core or shell) gives the best performance tradeoff. This is followed by the development of an analytical model, for the ON-state resistance in a 3-D SJ. Finally, we derive a specific, figure of merit for the 3-D SJs and compare it with that of the equivalent 2-D structures.
9 March 2020 in IEEE Transactions on Electron Devices
As the dimensions of the power metal-semiconductor field-effect transistor (MOSFET) are scaling down, and the output capacitance is considerably reduced, the fast dV/dt becomes an issue and can trigger severe oscillations during hard switching. To understand the origin of the dV/dt and the induced gate oscillations, the intricate link between the device operation and the circuit conditions is required. In this article, the dynamic gate-to-drain capacitance, CGD, is extracted by employing a five-terminal method. Through the use of simulations, the relationship between CGD and the induced gate oscillations is explored. In addition to this, the 2-D depletion behavior in a superjunction system, which affects the dynamic CGD, is investigated.
21 March 2019 in IEEE Electron Device Letters
An analytical model for superjunction (SJ) MOSFETs having an oxide pillar between the n-pillar and the p-pillar is developed. Owing to the low permittivity of the oxide, a high electric field is sustained across the oxide. This reduces the parasitic depletion width within the n-pillar, thus improving the current conducting path. The advantage of this structure is particularly visible as the cell pitch is scaled down and the pillows become narrower. The use of an oxide pillar leads to 30% reduction in the specific ON-state resistance when compared to a conventional SJ for a 2-μm cell pitch. The analytical model shows a good agreement with the simulation results.
23 October 2018 in IEEE Electron Device Letters
In this paper, we report an analytical model for the on-state characteristics of a superjunction MOSFET featuring a compensated pillar between the n-pillar and the p-pillar is established. Since a large amount of lateral electric field is sustained in the compensated region, the doping concentration in the n-pillar can be enhanced significantly, leading to a substantial reduction in the on-state resistance of the superjunction. Simulation results proved that the use of an extra compensated pillar within the superjunction structure reduces the on-state resistance by 25% compared to that of a conventional superjunction for the same breakdown voltage.