15 October 2020 in Nanoscale
By changing the mole fraction of water ( χ water ) in the solvent acetonitrile (MeCN), we report a simple procedure to control nanostructure morphology during electrodeposition.
15 March 2022 in Journal of Materials Chemistry A
Electrodeposition is used to produce α-V 2 O 5 nanobelts on a boron doped diamond electrode. The nanoscale dimensions facilitate accommodation of three Li + ions during discharge resulting in ω-Li 3 V 2 O 5 , which is reversible over at least one cycle.
29 July 2019 in Green Chemistry
Trace water addition drives the electrochemical removal of a Pd catalyst from organic synthesis reaction solutions.
14 July 2022 in ACS Measurement Science Au
The majority of carbon based transmission electron microscopy (TEM) platforms (grids) have a significant sp2 carbon component. Here, we report a top down fabrication technique for producing freestanding, robust, electron beam transparent and conductive sp3 carbon substrates from boron doped diamond (BDD) using an ion milling/polishing process. X-ray photoelectron spectroscopy and electrochemical measurements reveal the sp3 carbon character and advantageous electrochemical properties of a BDD electrode are retained during the milling process. TEM diffraction studies show a dominant (110) crystallographic orientation. Compared with conventional carbon TEM films on metal supports, the BDD-TEM electrodes offer superior thermal, mechanical and electrochemical stability properties. For the latter, no carbon loss is observed over a wide electrochemical potential range (up to 1.80 V vs RHE) under prolonged testing times (5 h) in acid (comparable with accelerated stress testing protocols). This result also highlights the use of BDD as a corrosion free electrocatalyst TEM support for fundamental studies, and in practical energy conversion applications. High magnification TEM imaging demonstrates resolution of isolated, single atoms on the BDD-TEM electrode during electrodeposition, due to the low background electron scattering of the BDD surface. Given the high thermal conductivity and stability of the BDD-TEM electrodes, in situ monitoring of thermally induced morphological changes is also possible, shown here for the thermally induced crystallization of amorphous electrodeposited manganese oxide to the electrochemically active γ-phase.
10 April 2026 in Sustainable Energy & Fuels
The integration of non-thermal CO 2 plasma (NTP) with a custom-designed electrolyte-gap electrolyser and CuO catalysts represents an innovative strategy to enhance the electrochemical conversion of CO 2 into C1–C3 products.