12 November 2018 in Scientific Reports
In this work, the effect of plasma on the chemistry and morphology of coatings deposited by Atmospheric Pressure Plasma Enhanced Chemical Vapor Deposition (AP-PECVD) is investigated. To do so, plasma deposited amorphous titanium dioxide (TiO2) thin films are compared to thin films deposited using Atmospheric Pressure Chemical Vapor Deposition (AP-CVD) not involving the use of plasma. We focus here on the effect and the interest of plasma in the AP-PECVD process over AP-CVD for low substrate temperature deposition. The advantages of AP-PECVD over AP-CVD are often suggested in many articles however no direct evidence of the role of the plasma for TiO2 deposition at atmospheric pressure was reported. Hence, herein, the deposition via both methods is directly compared by depositing coatings with and without plasma using the same CVD reactor. Through the control of the plasma parameters, we are able to form low carbon coatings at low temperature with a deposition rate twice faster than AP-CVD, clearly showing the interest of plasma. Plasma enhanced methods are promising for the deposition of coatings at industrial scale over large surface and at high rate.
10 November 2017 in Scientific Reports
Oil-water separation is a worldwide challenge because of the increasing production of industrial oily wastewater and frequent oil spills. The growing environmental and economic demands emphasize the need to develop effective solutions to separate oil and water. Recently, oil-water separation methods were developed by tuning the wettability of membranes via surface functionalization. However, the industrialization of such methods remains challenging due to the easy-fouling, high cost and complex fabrication. Herein, a simple and rapid pathway to separate oil from oil-water mixtures is reported using plasma surface functionalization in an open-air environment. The fine tuning and study of the plasma process parameters enables the selective functionalization of each side of the membranes which led respectively to a superhydrophobic-superoleophilic and superhydrophobic-oleophobic sides. The successful separation, without any external force, of a 50 mL oil-water solution in 6 minutes was achieved. This work paves the way for an efficient, low cost and easily upscalable method for oil-water separation due to the high versatility of the atmospheric pressure plasma processes.
1 November 2020 in Plasma Sources Science and Technology
A new low temperature multidipole plasma device with a magnetic X-point is developed. With a usual multidipole configuration generated by permanent neodymium magnets, a pair of axially flowing electrical currents up to 1.0 kA in the chamber creates figure-eight shaped poloidal magnetic fields with the X-point which separates plasmas into three distinct regions of core, edge and private regions. This new device, ma gnetic X -point s imu lator s ystem (MAXIMUS), is equipped with end-plate wall filaments, core filaments and a LaB 6 cathode as DC plasma sources. A wide range of plasma densities from 10 8 to 10 12 cm −3 with electron temperatures of 0.4 to 3 eV is achieved. Plasmas in MAXIMUS are highly correlated with the shape of the magnetic fields as electrons are magnetized. Furthermore, electron velocity distribution functions can be significantly modified from usual Maxwellian distributions due to the strong grad-B and curvature drifts of electrons, resulting in high skewness and excess kurtosis. Such a capability of controlling the distribution function as well as having closed circular magnetic fields will allow us to systematically investigate effects of non-Maxwellian distribution functions and curved magnetic fields on various physical phenomena such as cross-field diffusion process, plasma waves and many nonlinear physics including solitons, shock waves and three-wave interactions. Tokamak edge physics correlated with neutral particles is also to be investigated with MAXIMUS.