13 November 2006 in IEEE Transactions on Circuits and Systems I: Regular Papers
BCBertinho D'Andrade da Costa
Bertinho D'Andrade da Costa
+3
This paper presents a hand-held microsystem based on new fully integrated magnetoresistive biochips for biomolecular recognition (DNA hybridization, antibody antigen interaction, etc.). Magnetoresistive chip surfaces are chemically treated, enabling the immobilization of probe biomolecules such as DNA or antibodies. Fluid handling is also integrated in the biochip. The proposed microsystem not only integrates the biochip, which is an array of 16times16 magnetoresistive sensors, but it also provides all the electronic circuitry for addressing and reading out each transducer. The proposed architecture and circuits were specifically designed for achieving a compact, programmable and portable microsystem. The microsystem also integrates a hand-held analyzer connected through a wireless channel. A prototype of the system was already developed and detection of magnetic nanoparticles was obtained. This indicates that the system may be used for magnetic label based bioassays
10 November 2009 in IEEE Transactions on Instrumentation and Measurement
A fully integrated biochip based on a 16 × 16 scalable matrix structure of aluminum oxide magnetic tunnel junctions (MTJs) and thin-film diodes (TFDs of hydrogenated amorphous silicon) was fabricated and included as the biosensor of a portable handheld microsystem developed for biomolecular recognition detection using magnetic labels [deoxyribonucleic acid (DNA) hybridization, antibody antigen interaction, etc.]. The system uses magnetic field arraying of magnetically tagged biomolecules and can potentially be used to detect single or few biomolecules. Each biosensor matrix node is the series between a TFD (p-i-n or Schottky-barrier type) and an MTJ. In this paper, this matrix basic cell biosensor element is completely characterized and modeled. Experimental measured data are provided and compared with the proposed theoretical models results. It is shown that the diode may be used both as the matrix switching device and as an in-site temperature sensor and that the MTJ may act as the magnetoresistive sensor for detecting the fringe field of immobilized magnetic markers. Therefore, the fabricated fully integrated biochip included in the developed handheld microsystem may be used for biomolecular recognition.
14 October 2008 in IEEE Transactions on Instrumentation and Measurement
This paper proposes techniques for the extraction of biological information in a recently developed handheld biochip-based microsystem. The microsystem is based on a magnetoresistive array biochip composed of a number of sensing sites with magnetic tunneling junctions (MTJ) and diodes. Different techniques are addressed to drive the MTJs with different types of signals. Different filtering strategies that allow the recovery of biological signals from the noise without overly increasing either the time required for accessing the sensors or the power consumption of the board are proposed. Finally, new techniques and algorithms are proposed to deal with the variability of the fabrication parameters of the MTJ and the diodes. Experiments with the system in a setup to detect actual biological signals are presented with encouraging results.