1 April 2017 in Engineering Science and Technology, an International Journal
The mahua (Madhuca indica) is a non edible oil tree abundantly found in India. The kernel of mahua fruit contains 35–40% of oil which can be a good source of biodiesel. In this paper biodiesel has been prepared from raw mahua oil by transesterification process and different properties of mahua biodiesel have been studied. It has been found that the physico-chemical properties are within the range of different specification standards like ASTM D-6751 of USA, EN-14214 of Europe and IS-15607 of India. It contains around 41.2% saturated and 58.8% unsaturated fatty acid. Though viscosity of raw mahua oil reduces after transesterification, still it is higher than mineral diesel. The cold flow properties like cloud point, pour point and cold filter plugging point (CFPP) are also higher than mineral diesel. In this study mahua biodiesel has been blended with mineral diesel in different volumetric percentage and properties of blended biodiesel have been evaluated against the relevant standards. The different regression equations have been derived to predict the properties at different blending ratio. The developed mathematical models show higher coefficient of regression value (R2) between biodiesel properties and blending percentage. Blending ratio up to 0.3 i.e. 30% blending has been recommended as optimum blending ratio taking Cold Filter Plugging Point (CFPP) into account
6 November 2010 in The International Journal of Advanced Manufacturing Technology
1 April 2019 in Journal of King Saud University – Engineering Sciences
29 October 2021 in Mechanics Based Design of Structures and Machines
The paper presents procedure for design optimization of a spur gear set with the objective of minimization of the gear weight, contact stress along path of contact and optimum film thickness at the contact point. Particle swarm optimization, particle swarm optimization based teaching learning optimization and Jaya algorithms are presented here to ensure the remarkable reduction in weight and contact stress of a profile modified spur gear set with adequate film thickness at the point of contact. The parametric and sensitivity analysis performed here recommended the manufacturing tolerance to be maintained for the different critical design variables. The contact stress analysis using finite element method suggested the use of negatively altered tooth sum spur gear for compact design with better strength balance and scoring resistance. The optimized values of addendum co-efficient within the design space significantly improves the gear design as compared to the conventional design.
25 September 2018 in Lasers in Manufacturing and Materials Processing
2 January 2021 in Engineering Optimization
Recent trends in path planning have led to a proliferation of studies that find solutions to the path planning problems in an unknown cluster environment. This study aims to find an optimum impact-free path length for a mobile robot with a multi-objective optimization approach. The multi-objective optimization problem is formulated by using path length and a safety aspect as the two objectives. A hybrid population-based optimization algorithm, i.e. the hybrid particle swarm and chemical reaction optimization (HPCRO) algorithm, has been used to obtain a smooth path for the robot in an unknown environment with circular and/or polygonal obstacles. The results of the HPCRO algorithm are then compared with those of genetic algorithms, chemical reaction optimization and particle swarm optimization. Some statistical tests are performed to illustrate the superiority and potential applicability of the hybrid algorithm. The results of the hybrid algorithm are encouraging in terms of cost function value and computational cost.