We report the production of biobased plasticizers starting from citric acid (CA) by a two-step process comprising dehydration-hydrogenation of CA followed by a Fischer esterification. The use of citric acid based plasticizers is well-known in PVC. However, citrate esters tend to leach out of the PVC material over time. This problem is currently tackled by acetylating the tertiary hydroxyl group of CA via complex and environment polluting processes. Our alternative strategy consists in the removal of the tertiary hydroxyl group, resulting in propane-1,2,3-tricarboxylic acid (PTA). First, dehydration reactions of a large amount of CA (20 mmol) were performed at relatively mild reaction conditions (150 °C and 20 bar H2) using Al2(SO4)3 as a homogeneous catalyst and water as a green solvent. The catalytic system was proven to be robust in time and in the presence of other organic functionalities (e.g. amino acids with different functional groups, diacids). In a second step, the reaction mixture was transferred to a Dean–Stark setup in order to perform a Fischer esterification with n-butanol, during which the previously used Al2(SO4)3 could be recuperated. This resulted in an overall yield of 90% tributyl propane-1,2,3-tricarboxylate (TBPTC), which can be used as a plasticizer in PVC.
Acrylonitrile-based polymers are widely used in industrial and consumer settings, contributing to the growing amount of plastic waste. Yet, their chemical recycling has largely been neglected, partly due to the potential release of harmful gases such as HCN and NOx. Herein, we report a catalytic process that enables valorization of the polymer’s N- and C-content, without releasing harmful nitrogen gases. Our strategy uses Pd-based shuttle catalysis to transfer HCN units from the polymer’s backbone to an olefin acceptor molecule, generating a carbonaceous polyolefin residue amenable to further upcycling, alongside a useful nitrile building block. The protocol can be optimized in two ways: to efficiently functionalize olefins and produce nitriles in up to quantitative yields as a safe, cost-effective alternative to commonly employed nitrile synthesis methods, and to fully dehydrocyanate polymers using ethylene as HCN acceptor. Furthermore, we demonstrate the applicability of our strategy for the upcycling of commercial polyacrylonitrile materials.